The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable@xxxxxxxxxxxxxxx>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 134de5e831775e8b178db9b131c1d3769a766982 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable@xxxxxxxxxxxxxxx>' --in-reply-to '2024012613-unsliced-alphabet-6d99@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: 134de5e83177 ("arm64: dts: qcom: sm8150: fix USB DP/DM HS PHY interrupts") 54524b6987d1 ("arm64: dts: qcom: sm8150: fix USB wakeup interrupt types") 0c9dde0d2015 ("arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 134de5e831775e8b178db9b131c1d3769a766982 Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan+linaro@xxxxxxxxxx> Date: Wed, 13 Dec 2023 18:34:02 +0100 Subject: [PATCH] arm64: dts: qcom: sm8150: fix USB DP/DM HS PHY interrupts The USB DP/DM HS PHY interrupts need to be provided by the PDC interrupt controller in order to be able to wake the system up from low-power states and to be able to detect disconnect events, which requires triggering on falling edges. A recent commit updated the trigger type but failed to change the interrupt provider as required. This leads to the current Linux driver failing to probe instead of printing an error during suspend and USB wakeup not working as intended. Fixes: 54524b6987d1 ("arm64: dts: qcom: sm8150: fix USB wakeup interrupt types") Fixes: 0c9dde0d2015 ("arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes") Fixes: b33d2868e8d3 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes") Cc: stable@xxxxxxxxxxxxxxx # 5.10 Cc: Jack Pham <quic_jackp@xxxxxxxxxxx> Cc: Jonathan Marek <jonathan@xxxxxxxx> Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx> Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> Link: https://lore.kernel.org/r/20231213173403.29544-5-johan+linaro@xxxxxxxxxx Signed-off-by: Bjorn Andersson <andersson@xxxxxxxxxx> diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 3283da81ee46..7f67d7d0cfff 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -3547,10 +3547,10 @@ usb_1: usb@a6f8800 { <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; - interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 488 IRQ_TYPE_EDGE_BOTH>, - <GIC_SPI 489 IRQ_TYPE_EDGE_BOTH>; + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 8 IRQ_TYPE_EDGE_BOTH>, + <&pdc 9 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "hs_phy_irq", "ss_phy_irq", "dm_hs_phy_irq", "dp_hs_phy_irq"; @@ -3600,10 +3600,10 @@ usb_2: usb@a8f8800 { <&gcc GCC_USB30_SEC_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; - interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 490 IRQ_TYPE_EDGE_BOTH>, - <GIC_SPI 491 IRQ_TYPE_EDGE_BOTH>; + interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 10 IRQ_TYPE_EDGE_BOTH>, + <&pdc 11 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "hs_phy_irq", "ss_phy_irq", "dm_hs_phy_irq", "dp_hs_phy_irq";
