The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable@xxxxxxxxxxxxxxx>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 54524b6987d1fffe64cbf3dded1b2fa6b903edf9 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable@xxxxxxxxxxxxxxx>' --in-reply-to '2024012605-aspirin-landmine-596a@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: 54524b6987d1 ("arm64: dts: qcom: sm8150: fix USB wakeup interrupt types") 0c9dde0d2015 ("arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 54524b6987d1fffe64cbf3dded1b2fa6b903edf9 Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan+linaro@xxxxxxxxxx> Date: Mon, 20 Nov 2023 17:43:30 +0100 Subject: [PATCH] arm64: dts: qcom: sm8150: fix USB wakeup interrupt types The DP/DM wakeup interrupts are edge triggered and which edge to trigger on depends on use-case and whether a Low speed or Full/High speed device is connected. Fixes: 0c9dde0d2015 ("arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes") Fixes: b33d2868e8d3 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes") Cc: stable@xxxxxxxxxxxxxxx # 5.10 Cc: Jonathan Marek <jonathan@xxxxxxxx> Cc: Jack Pham <quic_jackp@xxxxxxxxxxx> Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx> Reviewed-by: Jack Pham <quic_jackp@xxxxxxxxxxx> Link: https://lore.kernel.org/r/20231120164331.8116-11-johan+linaro@xxxxxxxxxx Signed-off-by: Bjorn Andersson <andersson@xxxxxxxxxx> diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index fb7fd96ea61d..2ce07910dd13 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -3560,8 +3560,8 @@ usb_1: usb@a6f8800 { interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 488 IRQ_TYPE_EDGE_BOTH>, + <GIC_SPI 489 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "hs_phy_irq", "ss_phy_irq", "dm_hs_phy_irq", "dp_hs_phy_irq"; @@ -3613,8 +3613,8 @@ usb_2: usb@a8f8800 { interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 490 IRQ_TYPE_EDGE_BOTH>, + <GIC_SPI 491 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "hs_phy_irq", "ss_phy_irq", "dm_hs_phy_irq", "dp_hs_phy_irq";
