From: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx> [ Upstream commit 9f7843b515811aea6c56527eb195b622e9c01f12 ] Generic edp gets mode from edid. However, some panels report incorrect mode in this way, resulting in glitches on panel. Introduce a new quirk additional_mode to the generic edid to pick a correct hardcoded mode. Signed-off-by: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx> Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx> Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx> Link: https://patchwork.freedesktop.org/patch/msgid/20231117215056.1883314-2-hsinyi@xxxxxxxxxxxx Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/gpu/drm/panel/panel-edp.c | 48 +++++++++++++++++++++++++++++-- 1 file changed, 45 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c index 95c8472d878a..87a69293f594 100644 --- a/drivers/gpu/drm/panel/panel-edp.c +++ b/drivers/gpu/drm/panel/panel-edp.c @@ -203,6 +203,9 @@ struct edp_panel_entry { /** @name: Name of this panel (for printing to logs). */ const char *name; + + /** @override_edid_mode: Override the mode obtained by edid. */ + const struct drm_display_mode *override_edid_mode; }; struct panel_edp { @@ -301,6 +304,24 @@ static unsigned int panel_edp_get_display_modes(struct panel_edp *panel, return num; } +static int panel_edp_override_edid_mode(struct panel_edp *panel, + struct drm_connector *connector, + const struct drm_display_mode *override_mode) +{ + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(connector->dev, override_mode); + if (!mode) { + dev_err(panel->base.dev, "failed to add additional mode\n"); + return 0; + } + + mode->type |= DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + drm_mode_set_name(mode); + drm_mode_probed_add(connector, mode); + return 1; +} + static int panel_edp_get_non_edid_modes(struct panel_edp *panel, struct drm_connector *connector) { @@ -568,6 +589,9 @@ static int panel_edp_get_modes(struct drm_panel *panel, { struct panel_edp *p = to_panel_edp(panel); int num = 0; + bool has_override_edid_mode = p->detected_panel && + p->detected_panel != ERR_PTR(-EINVAL) && + p->detected_panel->override_edid_mode; /* probe EDID if a DDC bus is available */ if (p->ddc) { @@ -575,9 +599,18 @@ static int panel_edp_get_modes(struct drm_panel *panel, if (!p->edid) p->edid = drm_get_edid(connector, p->ddc); - - if (p->edid) - num += drm_add_edid_modes(connector, p->edid); + if (p->edid) { + if (has_override_edid_mode) { + /* + * override_edid_mode is specified. Use + * override_edid_mode instead of from edid. + */ + num += panel_edp_override_edid_mode(p, connector, + p->detected_panel->override_edid_mode); + } else { + num += drm_add_edid_modes(connector, p->edid); + } + } pm_runtime_mark_last_busy(panel->dev); pm_runtime_put_autosuspend(panel->dev); @@ -1828,6 +1861,15 @@ static const struct panel_delay delay_200_500_e200 = { .delay = _delay \ } +#define EDP_PANEL_ENTRY2(vend_chr_0, vend_chr_1, vend_chr_2, product_id, _delay, _name, _mode) \ +{ \ + .name = _name, \ + .panel_id = drm_edid_encode_panel_id(vend_chr_0, vend_chr_1, vend_chr_2, \ + product_id), \ + .delay = _delay, \ + .override_edid_mode = _mode \ +} + /* * This table is used to figure out power sequencing delays for panels that * are detected by EDID. Entries here may point to entries in the -- 2.43.0
