On 18/01/2024 16:58, Johan Hovold wrote:
The default PA gain is set to a pretty high level of 15 dB. Initialise
the register to the minimum -3 dB level instead.
This is specifically needed to allow machine drivers to use the lowest
level as a volume limit.
Cc: stable@xxxxxxxxxxxxxxx # 6.5
Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
sound/soc/codecs/wsa883x.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/codecs/wsa883x.c b/sound/soc/codecs/wsa883x.c
index 32983ca9afba..8942c88dee09 100644
--- a/sound/soc/codecs/wsa883x.c
+++ b/sound/soc/codecs/wsa883x.c
@@ -722,7 +722,7 @@ static struct reg_default wsa883x_defaults[] = {
{ WSA883X_WAVG_PER_6_7, 0x88 },
{ WSA883X_WAVG_STA, 0x00 },
{ WSA883X_DRE_CTL_0, 0x70 },
- { WSA883X_DRE_CTL_1, 0x08 },
this is hw default value.
+ { WSA883X_DRE_CTL_1, 0x1e },
{ WSA883X_DRE_IDLE_DET_CTL, 0x1F },
{ WSA883X_CLSH_CTL_0, 0x37 },
{ WSA883X_CLSH_CTL_1, 0x81 },
