[PATCH AUTOSEL 6.6 067/104] ARM: dts: imx25/27: Pass timing0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Fabio Estevam <festevam@xxxxxxx>

[ Upstream commit 11ab7ad6f795ae23c398a4a5c56505d3dab27c4c ]

Per display-timings.yaml, the 'timing' pattern should be used to
describe the display timings.

Change it accordingly to fix the following dt-schema warning:

imx27-apf27dev.dtb: display-timings: '800x480' does not match any of the regexes: '^timing', 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/display/panel/display-timings.yaml#

Signed-off-by: Fabio Estevam <festevam@xxxxxxx>
Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 .../dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts   | 2 +-
 .../dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts   | 2 +-
 .../dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts    | 2 +-
 arch/arm/boot/dts/nxp/imx/imx25-pdk.dts                         | 2 +-
 arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts                    | 2 +-
 arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts  | 2 +-
 arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts        | 2 +-
 arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts          | 2 +-
 8 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
index fc8a502fc957..6cddb2cc36fe 100644
--- a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
@@ -16,7 +16,7 @@ cmo_qvga: display {
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&qvga_timings>;
-			qvga_timings: 320x240 {
+			qvga_timings: timing0 {
 				clock-frequency = <6500000>;
 				hactive = <320>;
 				vactive = <240>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
index 80a7f96de4c6..64b2ffac463b 100644
--- a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
@@ -16,7 +16,7 @@ dvi_svga: display {
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&dvi_svga_timings>;
-			dvi_svga_timings: 800x600 {
+			dvi_svga_timings: timing0 {
 				clock-frequency = <40000000>;
 				hactive = <800>;
 				vactive = <600>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
index 24027a1fb46d..fb074bfdaa8d 100644
--- a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
@@ -16,7 +16,7 @@ dvi_vga: display {
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&dvi_vga_timings>;
-			dvi_vga_timings: 640x480 {
+			dvi_vga_timings: timing0 {
 				clock-frequency = <31250000>;
 				hactive = <640>;
 				vactive = <480>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts b/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts
index 04f4b127a172..e93bf3b7115f 100644
--- a/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts
@@ -68,7 +68,7 @@ wvga: display {
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&wvga_timings>;
-			wvga_timings: 640x480 {
+			wvga_timings: timing0 {
 				hactive = <640>;
 				vactive = <480>;
 				hback-porch = <45>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts b/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts
index a21f1f7c24b8..f047a8487073 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts
@@ -16,7 +16,7 @@ display: display {
 		fsl,pcr = <0xfae80083>;	/* non-standard but required */
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 800x480 {
+			timing0: timing0 {
 				clock-frequency = <33000033>;
 				hactive = <800>;
 				vactive = <480>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts b/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
index 145e459625b3..d78793601306 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
@@ -16,7 +16,7 @@ display0: CMO-QVGA {
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 320x240 {
+			timing0: timing0 {
 				clock-frequency = <6500000>;
 				hactive = <320>;
 				vactive = <240>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts
index 25442eba21c1..27c93b9fe049 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts
@@ -19,7 +19,7 @@ display: display {
 		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 640x480 {
+			timing0: timing0 {
 				hactive = <640>;
 				vactive = <480>;
 				hback-porch = <112>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
index 7f0cd4d3ec2d..67b235044b70 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
@@ -19,7 +19,7 @@ display0: LQ035Q7 {
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 240x320 {
+			timing0: timing0 {
 				clock-frequency = <5500000>;
 				hactive = <240>;
 				vactive = <320>;
-- 
2.43.0





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux