Hi, Shawn.
On 11/21/2014 03:39 PM, Shawn Guo wrote:
> Commit f1d2736c8156 ("mmc: dw_mmc: control card read threshold")
> introduces a regression for use case where PIO mode is used, i.e.
> CONFIG_MMC_DW_IDMAC is not disabled. It stops kernel from booting
> like below.
>
> dw_mmc 9408000.dwmmc: fifo-depth property not found, using value of FIFOTH register as default
> dw_mmc 9408000.dwmmc: Using PIO mode.
> dw_mmc 9408000.dwmmc: Version ID is 210a
> dw_mmc 9408000.dwmmc: DW MMC controller at irq 72, 32 bit host data width, 32 deep fifo
> dw_mmc 9408000.dwmmc: 1 slots initialized
> ...
> Waiting for root device /dev/mmcblk0p2...
> mmc_host mmc0: Bus speed (slot 0) = 52000000Hz (slot req 50000000Hz, actual 26000000HZ div = 1)
> mmc0: new high speed SDHC card at address b368
> mmcblk0: mmc0:b368 AF UD 3.84 GiB
Stopping at here? I didn't know what's difference before applied your patch.
Clearing Card-read threshold value at every time would be caused that stop kernel?
Just wonder it.
>
> Rather than clearing read threshold bits, the best thing that function
> dw_mci_ctrl_rd_thld() should do is leaving the bits untouched, in case
> that card read threshold setup is not needed.
>
> The patch fixes the regression by changing dw_mci_ctrl_rd_thld() a bit
> to do nothing in case card read threshold bits setup is not needed.
>
> Signed-off-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
> Fixes: f1d2736c8156 ("mmc: dw_mmc: control card read threshold")
> Cc: <stable@xxxxxxxxxxxxxxx> # 3.13+
> ---
> drivers/mmc/host/dw_mmc.c | 7 ++-----
> 1 file changed, 2 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 69f0cc68d5b2..52c04ba69970 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -628,13 +628,13 @@ static void dw_mci_ctrl_rd_thld(struct dw_mci *host, struct mmc_data *data)
>
> if (host->timing != MMC_TIMING_MMC_HS200 &&
> host->timing != MMC_TIMING_UHS_SDR104)
> - goto disable;
> + return;
>
> blksz_depth = blksz / (1 << host->data_shift);
> fifo_depth = host->fifo_depth;
>
> if (blksz_depth > fifo_depth)
> - goto disable;
> + return;
>
> /*
> * If (blksz_depth) >= (fifo_depth >> 1), should be 'thld_size <= blksz'
> @@ -644,9 +644,6 @@ static void dw_mci_ctrl_rd_thld(struct dw_mci *host, struct mmc_data *data)
> thld_size = blksz;
> mci_writel(host, CDTHRCTL, SDMMC_SET_RD_THLD(thld_size, 1));
> return;
Then "return" could be also removed.
Best Regards,
Jaehoon Chung
> -
> -disable:
> - mci_writel(host, CDTHRCTL, SDMMC_SET_RD_THLD(0, 0));
> }
>
> static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data)
>
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html