On Tue, Nov 18, 2014 at 09:00:58PM +0400, Alexander Kochetkov wrote: > commit 1d7afc95946487945cc7f5019b41255b72224b70 (i2c: omap: ack IRQ in parts) > changed the interrupt handler to complete transfers without clearing > XRDY (AL case) and ARDY (NACK case) flags. XRDY or ARDY interrupts will be > fired again. As a result, ISR keep processing transfer after it was already > complete (from the driver code point of view). > > A didn't see real impacts of the 1d7afc9, but it is really bad idea to > have ISR running on user data after transfer was complete. > > It looks, what 1d7afc9 violate TI specs in what how AL and NACK should be > handled (see Note 1, sprugn4r, Figure 17-31 and Figure 17-32). > > According to specs (if I understood correctly), in case of NACK and AL driver > must reset NACK, AL, ARDY, RDR, and RRDY (Master Receive Mode), and > NACK, AL, ARDY, and XDR (Master Transmitter Mode). > > All that is done down the code under the if condition: > if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) ... > > The patch restore pre 1d7afc9 logic of handling NACK and AL interrupts, so > no interrupts is fired after ISR informs the rest of driver what transfer > complete. > > Note: instead of removing break under NACK case, we could just replace 'break' > with 'continue' and allow NACK transfer to finish using ARDY event. I found > that NACK and ARDY bits usually set together. That case confirm TI wiki: > http://processors.wiki.ti.com/index.php/I2C_Tips#Detecting_and_handling_NACK > > In order if someone interested in the event traces for NACK and AL cases, > I sent them to mailing list. > > Tested on Beagleboard XM C. > > Signed-off-by: Alexander Kochetkov <al.kochet@xxxxxxxxx> > Fixes: 1d7afc9 i2c: omap: ack IRQ in parts > Cc: <stable@xxxxxxxxxxxxxxx> # v3.7+ I could not see any breakage or anything wrong on OMAP2 & OMAP3. On OMAP1 I don't have anything on the OMAP I2C bus, so cannot really test anything there. Tested-by: Aaro Koskinen <aaro.koskinen@xxxxxx> > --- > drivers/i2c/busses/i2c-omap.c | 2 -- > 1 file changed, 2 deletions(-) > > diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c > index 90dcc2e..9af7095 100644 > --- a/drivers/i2c/busses/i2c-omap.c > +++ b/drivers/i2c/busses/i2c-omap.c > @@ -926,14 +926,12 @@ omap_i2c_isr_thread(int this_irq, void *dev_id) > if (stat & OMAP_I2C_STAT_NACK) { > err |= OMAP_I2C_STAT_NACK; > omap_i2c_ack_stat(dev, OMAP_I2C_STAT_NACK); > - break; > } > > if (stat & OMAP_I2C_STAT_AL) { > dev_err(dev->dev, "Arbitration lost\n"); > err |= OMAP_I2C_STAT_AL; > omap_i2c_ack_stat(dev, OMAP_I2C_STAT_AL); > - break; > } > > /* > -- > 1.7.9.5 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html