On 2024-01-12, Gui-Dong Han <2045gemini@xxxxxxxxx> wrote:
> In uart_throttle() and uart_unthrottle():
> if (port->status & mask) {
> port->ops->throttle/unthrottle(port);
> mask &= ~port->status;
> }
> // Code segment utilizing the mask value to determine UART behavior
>
> In uart_change_line_settings():
> uart_port_lock_irq(uport);
> // Code segment responsible for updating uport->status
> uart_port_unlock_irq(uport);
>
> In the uart_throttle() and uart_unthrottle() functions, there is a double
> fetch issue due to concurrent execution with uart_change_line_settings().
> In uart_throttle() and uart_unthrottle(), the check
> if (port->status & mask) is made, followed by mask &= ~port->status,
> where the relevant bits are cleared. However, port->status may be modified
> in uart_change_line_settings(). The current implementation does not ensure
> atomicity in the access and modification of port->status and mask. This
> can result in mask being updated based on a modified port->status value,
> leading to improper UART actions.
>
> This possible bug is found by an experimental static analysis tool
> developed by our team, BassCheck[1]. This tool analyzes the locking APIs
> to extract function pairs that can be concurrently executed, and then
> analyzes the instructions in the paired functions to identify possible
> concurrency bugs including data races and atomicity violations. The above
> possible bug is reported when our tool analyzes the source code of
> Linux 5.17.
>
> To resolve this double fetch, it is suggested to add a uart_port_lock pair
> in uart_throttle() and uart_unthrottle(). With this patch applied, our
> tool no longer reports the bug, with the kernel configuration allyesconfig
> for x86_64. Due to the absence of the requisite hardware, we are unable to
> conduct runtime testing of the patch. Therefore, our verification is
> solely based on code logic analysis.
>
> [1] https://sites.google.com/view/basscheck/
>
> Fixes: 391f93f2ec9f ("serial: core: Rework hw-assisted flow control support")
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Gui-Dong Han <2045gemini@xxxxxxxxx>
> ---
> drivers/tty/serial/serial_core.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
> index 80085b151b34..9d905fdf2843 100644
> --- a/drivers/tty/serial/serial_core.c
> +++ b/drivers/tty/serial/serial_core.c
> @@ -723,11 +723,13 @@ static void uart_throttle(struct tty_struct *tty)
> mask |= UPSTAT_AUTOXOFF;
> if (C_CRTSCTS(tty))
> mask |= UPSTAT_AUTORTS;
> -
> +
> + uart_port_lock_irq(port);
> if (port->status & mask) {
> port->ops->throttle(port);
> mask &= ~port->status;
> }
> + uart_port_unlock_irq(port);
You would also need to remove uart_port_lock_irq() out of all the
throttle() callbacks.
>
> if (mask & UPSTAT_AUTORTS)
> uart_clear_mctrl(port, TIOCM_RTS);
> @@ -753,10 +755,12 @@ static void uart_unthrottle(struct tty_struct *tty)
> if (C_CRTSCTS(tty))
> mask |= UPSTAT_AUTORTS;
>
> + uart_port_lock_irq(port);
> if (port->status & mask) {
> port->ops->unthrottle(port);
> mask &= ~port->status;
> }
> + uart_port_unlock_irq(port);
You would also need to remove uart_port_lock_irq() out of all the
unthrottle() callbacks.
John Ogness
