6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wenchao Chen <wenchao.chen@xxxxxxxxxx>
commit 8abf77c88929b6d20fa4f9928b18d6448d64e293 upstream.
Some eMMC devices that do not close the auto clk gate after hw reset will
cause eMMC initialization to fail. Let's fix this.
Signed-off-by: Wenchao Chen <wenchao.chen@xxxxxxxxxx>
Fixes: ff874dbc4f86 ("mmc: sdhci-sprd: Disable CLK_AUTO when the clock is less than 400K")
Reviewed-by: Baolin Wang <baolin.wang@xxxxxxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Link: https://lore.kernel.org/r/20231204064934.21236-1-wenchao.chen@xxxxxxxxxx
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/mmc/host/sdhci-sprd.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/drivers/mmc/host/sdhci-sprd.c
+++ b/drivers/mmc/host/sdhci-sprd.c
@@ -228,15 +228,19 @@ static inline void _sdhci_sprd_set_clock
div = ((div & 0x300) >> 2) | ((div & 0xFF) << 8);
sdhci_enable_clk(host, div);
+ val = sdhci_readl(host, SDHCI_SPRD_REG_32_BUSY_POSI);
+ mask = SDHCI_SPRD_BIT_OUTR_CLK_AUTO_EN | SDHCI_SPRD_BIT_INNR_CLK_AUTO_EN;
/* Enable CLK_AUTO when the clock is greater than 400K. */
if (clk > 400000) {
- val = sdhci_readl(host, SDHCI_SPRD_REG_32_BUSY_POSI);
- mask = SDHCI_SPRD_BIT_OUTR_CLK_AUTO_EN |
- SDHCI_SPRD_BIT_INNR_CLK_AUTO_EN;
if (mask != (val & mask)) {
val |= mask;
sdhci_writel(host, val, SDHCI_SPRD_REG_32_BUSY_POSI);
}
+ } else {
+ if (val & mask) {
+ val &= ~mask;
+ sdhci_writel(host, val, SDHCI_SPRD_REG_32_BUSY_POSI);
+ }
}
}
