5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Sneddon <dan.sneddon@xxxxxxxxxxxxx>
[ Upstream commit 69e1818ad27bae167eeaaf6829d4a08900ef5153 ]
Commit 5fa5e6dec762 ("spi: atmel: Switch to transfer_one transfer
method") switched to using transfer_one and set_cs. The
core doesn't call set_cs when the chip select lines are gpios. Add the
SPI_MASTER_GPIO_SS flag to the driver to ensure the calls to set_cs
happen since the driver programs configuration registers there.
Fixes: 5fa5e6dec762 ("spi: atmel: Switch to transfer_one transfer method")
Signed-off-by: Dan Sneddon <dan.sneddon@xxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20210629192218.32125-1-dan.sneddon@xxxxxxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Stable-dep-of: fc70d643a2f6 ("spi: atmel: Fix clock issue when using devices with different polarities")
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/spi/spi-atmel.c | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 2dba2089f2b7e..19499131e5676 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -352,8 +352,6 @@ static void cs_activate(struct atmel_spi *as, struct spi_device *spi)
}
mr = spi_readl(as, MR);
- if (spi->cs_gpiod)
- gpiod_set_value(spi->cs_gpiod, 1);
} else {
u32 cpol = (spi->mode & SPI_CPOL) ? SPI_BIT(CPOL) : 0;
int i;
@@ -369,8 +367,6 @@ static void cs_activate(struct atmel_spi *as, struct spi_device *spi)
mr = spi_readl(as, MR);
mr = SPI_BFINS(PCS, ~(1 << chip_select), mr);
- if (spi->cs_gpiod)
- gpiod_set_value(spi->cs_gpiod, 1);
spi_writel(as, MR, mr);
}
@@ -400,8 +396,6 @@ static void cs_deactivate(struct atmel_spi *as, struct spi_device *spi)
if (!spi->cs_gpiod)
spi_writel(as, CR, SPI_BIT(LASTXFER));
- else
- gpiod_set_value(spi->cs_gpiod, 0);
}
static void atmel_spi_lock(struct atmel_spi *as) __acquires(&as->lock)
@@ -1498,7 +1492,8 @@ static int atmel_spi_probe(struct platform_device *pdev)
master->bus_num = pdev->id;
master->num_chipselect = 4;
master->setup = atmel_spi_setup;
- master->flags = (SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX);
+ master->flags = (SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX |
+ SPI_MASTER_GPIO_SS);
master->transfer_one = atmel_spi_one_transfer;
master->set_cs = atmel_spi_set_cs;
master->cleanup = atmel_spi_cleanup;
--
2.43.0
