[PATCH v2] LoongArch: Fix and simplify fcsr initialization on execve

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



There has been a lingering bug in LoongArch Linux systems causing some
GCC tests to intermittently fail (see Closes link).  I've made a minimal
reproducer:

    zsh% cat measure.s
    .align 4
    .globl _start
    _start:
        movfcsr2gr  $a0, $fcsr0
        bstrpick.w  $a0, $a0, 16, 16
        beqz        $a0, .ok
	break       0
    .ok:
        li.w        $a7, 93
	syscall     0
    zsh% cc mesaure.s -o measure -nostdlib
    zsh% echo $((1.0/3))
    0.33333333333333331
    zsh% while ./measure; do ; done

This while loop should not stop as POSIX is clear that execve must set
fenv to the default, where FCSR should be zero.  But in fact it will
just stop after running for a while (normally less than 30 seconds).
Note that "$((1.0/3))" is needed to reproduce the issue because it
raises FE_INVALID and makes fcsr0 non-zero.

The problem is we are relying on SET_PERSONALITY2 to reset
current->thread.fpu.fcsr.  But SET_PERSONALITY2 is executed before
start_thread which calls lose_fpu(0).  We can see if kernel preempt is
enabled, we may switch to another thread after SET_PERSONALITY2 but
before lose_fpu(0).  Then bad thing happens: during the thread switch
the value of the fcsr0 register is stored into current->thread.fpu.fcsr,
making it dirty again.

The issue can be fixed by setting current->thread.fpu.fcsr after
lose_fpu(0) because lose_fpu clears TIF_USEDFPU, then the thread
switch won't touch current->thread.fpu.fcsr.

The only other architecture setting FCSR in SET_PERSONALITY2 is MIPS.
They do this for supporting different FP flavors (NaN encodings etc).
which do not exist on LoongArch.  I'm not sure how MIPS evades the issue
(or maybe it's just buggy too) but I'll investigate it later.

For LoongArch, just remove the current->thread.fpu.fcsr setting from
SET_PERSONALITY2 and do it in start_thread, after lose_fpu(0).

The while loop failing with the mainline kernel has survived one hour
after this change.

Closes: https://github.com/loongson-community/discussions/issues/7
Fixes: 803b0fc5c3f2 ("LoongArch: Add process management")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Xi Ruoyao <xry111@xxxxxxxxxxx>
---

v1 -> v2:
- Still set current->thread.fpu.fcsr to boot_cpu_data.fpu_csr0 instead
  of constant 0.

 arch/loongarch/include/asm/elf.h | 5 -----
 arch/loongarch/kernel/elf.c      | 5 -----
 arch/loongarch/kernel/process.c  | 1 +
 3 files changed, 1 insertion(+), 10 deletions(-)

diff --git a/arch/loongarch/include/asm/elf.h b/arch/loongarch/include/asm/elf.h
index 9b16a3b8e706..f16bd42456e4 100644
--- a/arch/loongarch/include/asm/elf.h
+++ b/arch/loongarch/include/asm/elf.h
@@ -241,8 +241,6 @@ void loongarch_dump_regs64(u64 *uregs, const struct pt_regs *regs);
 do {									\
 	current->thread.vdso = &vdso_info;				\
 									\
-	loongarch_set_personality_fcsr(state);				\
-									\
 	if (personality(current->personality) != PER_LINUX)		\
 		set_personality(PER_LINUX);				\
 } while (0)
@@ -259,7 +257,6 @@ do {									\
 	clear_thread_flag(TIF_32BIT_ADDR);				\
 									\
 	current->thread.vdso = &vdso_info;				\
-	loongarch_set_personality_fcsr(state);				\
 									\
 	p = personality(current->personality);				\
 	if (p != PER_LINUX32 && p != PER_LINUX)				\
@@ -340,6 +337,4 @@ extern int arch_elf_pt_proc(void *ehdr, void *phdr, struct file *elf,
 extern int arch_check_elf(void *ehdr, bool has_interpreter, void *interp_ehdr,
 			  struct arch_elf_state *state);
 
-extern void loongarch_set_personality_fcsr(struct arch_elf_state *state);
-
 #endif /* _ASM_ELF_H */
diff --git a/arch/loongarch/kernel/elf.c b/arch/loongarch/kernel/elf.c
index 183e94fc9c69..0fa81ced28dc 100644
--- a/arch/loongarch/kernel/elf.c
+++ b/arch/loongarch/kernel/elf.c
@@ -23,8 +23,3 @@ int arch_check_elf(void *_ehdr, bool has_interpreter, void *_interp_ehdr,
 {
 	return 0;
 }
-
-void loongarch_set_personality_fcsr(struct arch_elf_state *state)
-{
-	current->thread.fpu.fcsr = boot_cpu_data.fpu_csr0;
-}
diff --git a/arch/loongarch/kernel/process.c b/arch/loongarch/kernel/process.c
index 767d94cce0de..3f9cae615f52 100644
--- a/arch/loongarch/kernel/process.c
+++ b/arch/loongarch/kernel/process.c
@@ -92,6 +92,7 @@ void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long sp)
 	clear_used_math();
 	regs->csr_era = pc;
 	regs->regs[3] = sp;
+	current->thread.fpu.fcsr = boot_cpu_data.fpu_csr0;
 }
 
 void flush_thread(void)
-- 
2.43.0





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux