Dear Felix,
Thank you very much for the patch. I am adding Johan to Cc field.
Am 25.12.23 um 21:01 schrieb Felix Zhang:
Starting v6.5, Bluetooth does not work at all on my T2 MacBookAir9,1
with the BCM4377 chip. When I boot up the computer, go into
Somehow a blank line snug in above.
bluetoothctl, and then try to run commands like scan on, show, list,
it returns "No default controller available." I have tried reloading
the
It’d be great if you reflowed for 75 characters per line (also below).
kernel module, in which the log outputs "{Added,Removed} hci0
(unconfigured)." With this patch, I am able to use Bluetooth as
normal
without any errors regarding hci0 being unconfigured. However, an
issue is still present where sometimes hci_bcm4377 will have to be
reloaded in order to get bluetooth to work. I believe this was still
present before the previously mentioned commit.
Due to the bit HCI_QUIRK_USE_BDADDR_PROPERTY being always set in
drivers/bluetooth/hci_bcm4377.c (line 2371), the chip would be left
unconfigured on kernels compiled after commit 6945795bc81a
("Bluetooth:
fix use-bdaddr-property quirk") due to a change in its logic. On the
M1 Macs, the device would be configured in the devicetree. However,
that is not the case on T2 Macs. Because the bluetooth adapter is
left
unconfigured, it is not usable in the operating system. In order to
circumvent this issue, a flag is added to prevent the bit from being
set on the BCM4377, while setting it on the other devices.
Because I do not have an M1 device to test this patch on, I am not sure
whether the patch breaks anything for said devices. I would be very
grateful if anyone is willing to test this patch on their M1 device.
I would also like to thank Kerem Karabay <kekrby@xxxxxxxxx> for
assisting me with this patch.
Fixes: 6945795bc81a ("Bluetooth: fix use-bdaddr-property quirk")
Signed-off-by: Felix Zhang <mrman@xxxxxxxxxxxxx>
---
v3:
* Adjust the format to pass the CI (again).
---
drivers/bluetooth/hci_bcm4377.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/hci_bcm4377.c
b/drivers/bluetooth/hci_bcm4377.c
index a61757835695..5c6fef1aa0f6 100644
--- a/drivers/bluetooth/hci_bcm4377.c
+++ b/drivers/bluetooth/hci_bcm4377.c
@@ -513,6 +513,7 @@ struct bcm4377_hw {
unsigned long broken_ext_scan : 1;
unsigned long broken_mws_transport_config : 1;
unsigned long broken_le_coded : 1;
+ unsigned long use_bdaddr_property : 1;
int (*send_calibration)(struct bcm4377_data *bcm4377);
int (*send_ptb)(struct bcm4377_data *bcm4377,
@@ -2368,7 +2369,8 @@ static int bcm4377_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
hdev->set_bdaddr = bcm4377_hci_set_bdaddr;
hdev->setup = bcm4377_hci_setup;
- set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
+ if (bcm4377->hw->use_bdaddr_property)
+ set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
if (bcm4377->hw->broken_mws_transport_config)
set_bit(HCI_QUIRK_BROKEN_MWS_TRANSPORT_CONFIG, &hdev-
quirks);
if (bcm4377->hw->broken_ext_scan)
@@ -2465,6 +2467,7 @@ static const struct bcm4377_hw
bcm4377_hw_variants[] = {
.has_bar0_core2_window2 = true,
.broken_mws_transport_config = true,
.broken_le_coded = true,
+ .use_bdaddr_property = true,
.send_calibration = bcm4378_send_calibration,
.send_ptb = bcm4378_send_ptb,
},
@@ -2479,6 +2482,7 @@ static const struct bcm4377_hw
bcm4377_hw_variants[] = {
.clear_pciecfg_subsystem_ctrl_bit19 = true,
.broken_mws_transport_config = true,
.broken_le_coded = true,
+ .use_bdaddr_property = true,
.send_calibration = bcm4387_send_calibration,
.send_ptb = bcm4378_send_ptb,
},
The diff looks good, and it works for you.
Kind regards,
Paul
