From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
Commit 834449872105 ("sc16is7xx: Fix for multi-channel stall") changed
sc16is7xx_port_irq() from looping multiple times when there was still
interrupts to serve. It simply changed the do {} while(1) loop to a
do {} while(0) loop, which makes the loop itself now obsolete.
Clean the code by removing this obsolete do {} while(0) loop.
Fixes: 834449872105 ("sc16is7xx: Fix for multi-channel stall")
Cc: stable@xxxxxxxxxxxxxxx
Suggested-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Signed-off-by: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
---
drivers/tty/serial/sc16is7xx.c | 81 ++++++++++++++++------------------
1 file changed, 39 insertions(+), 42 deletions(-)
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index ced2446909a2..44a11c89c949 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -725,58 +725,55 @@ static void sc16is7xx_update_mlines(struct sc16is7xx_one *one)
static bool sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno)
{
bool rc = true;
+ unsigned int iir, rxlen;
struct uart_port *port = &s->p[portno].port;
struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
mutex_lock(&one->efr_lock);
- do {
- unsigned int iir, rxlen;
+ iir = sc16is7xx_port_read(port, SC16IS7XX_IIR_REG);
+ if (iir & SC16IS7XX_IIR_NO_INT_BIT) {
+ rc = false;
+ goto out_port_irq;
+ }
- iir = sc16is7xx_port_read(port, SC16IS7XX_IIR_REG);
- if (iir & SC16IS7XX_IIR_NO_INT_BIT) {
- rc = false;
- goto out_port_irq;
- }
+ iir &= SC16IS7XX_IIR_ID_MASK;
- iir &= SC16IS7XX_IIR_ID_MASK;
+ switch (iir) {
+ case SC16IS7XX_IIR_RDI_SRC:
+ case SC16IS7XX_IIR_RLSE_SRC:
+ case SC16IS7XX_IIR_RTOI_SRC:
+ case SC16IS7XX_IIR_XOFFI_SRC:
+ rxlen = sc16is7xx_port_read(port, SC16IS7XX_RXLVL_REG);
- switch (iir) {
- case SC16IS7XX_IIR_RDI_SRC:
- case SC16IS7XX_IIR_RLSE_SRC:
- case SC16IS7XX_IIR_RTOI_SRC:
- case SC16IS7XX_IIR_XOFFI_SRC:
- rxlen = sc16is7xx_port_read(port, SC16IS7XX_RXLVL_REG);
+ /*
+ * There is a silicon bug that makes the chip report a
+ * time-out interrupt but no data in the FIFO. This is
+ * described in errata section 18.1.4.
+ *
+ * When this happens, read one byte from the FIFO to
+ * clear the interrupt.
+ */
+ if (iir == SC16IS7XX_IIR_RTOI_SRC && !rxlen)
+ rxlen = 1;
- /*
- * There is a silicon bug that makes the chip report a
- * time-out interrupt but no data in the FIFO. This is
- * described in errata section 18.1.4.
- *
- * When this happens, read one byte from the FIFO to
- * clear the interrupt.
- */
- if (iir == SC16IS7XX_IIR_RTOI_SRC && !rxlen)
- rxlen = 1;
-
- if (rxlen)
- sc16is7xx_handle_rx(port, rxlen, iir);
- break;
+ if (rxlen)
+ sc16is7xx_handle_rx(port, rxlen, iir);
+ break;
/* CTSRTS interrupt comes only when CTS goes inactive */
- case SC16IS7XX_IIR_CTSRTS_SRC:
- case SC16IS7XX_IIR_MSI_SRC:
- sc16is7xx_update_mlines(one);
- break;
- case SC16IS7XX_IIR_THRI_SRC:
- sc16is7xx_handle_tx(port);
- break;
- default:
- dev_err_ratelimited(port->dev,
- "ttySC%i: Unexpected interrupt: %x",
- port->line, iir);
- break;
- }
- } while (0);
+ case SC16IS7XX_IIR_CTSRTS_SRC:
+ case SC16IS7XX_IIR_MSI_SRC:
+ sc16is7xx_update_mlines(one);
+ break;
+ case SC16IS7XX_IIR_THRI_SRC:
+ sc16is7xx_handle_tx(port);
+ break;
+ default:
+ dev_err_ratelimited(port->dev,
+ "ttySC%i: Unexpected interrupt: %x",
+ port->line, iir);
+ break;
+ }
out_port_irq:
mutex_unlock(&one->efr_lock);
--
2.39.2
