This is a note to let you know that I've just added the patch titled
serial: sc16is7xx: remove global regmap from struct sc16is7xx_port
to my tty git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git
in the tty-testing branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will be merged to the tty-next branch sometime soon,
after it passes testing, and the merge window is open.
If you have any questions about this process, please let me know.
>From f6959c5217bd799bcb770b95d3c09b3244e175c6 Mon Sep 17 00:00:00 2001
From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
Date: Mon, 11 Dec 2023 12:13:49 -0500
Subject: serial: sc16is7xx: remove global regmap from struct sc16is7xx_port
Remove global struct regmap so that it is more obvious that this
regmap is to be used only in the probe function.
Also add a comment to that effect in probe function.
Fixes: 3837a0379533 ("serial: sc16is7xx: improve regmap debugfs by using one regmap per port")
Cc: <stable@xxxxxxxxxxxxxxx>
Suggested-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Signed-off-by: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20231211171353.2901416-3-hugo@xxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/tty/serial/sc16is7xx.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 8d1de4982b65..a4ad3ae8cae2 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -334,7 +334,6 @@ struct sc16is7xx_one {
struct sc16is7xx_port {
const struct sc16is7xx_devtype *devtype;
- struct regmap *regmap;
struct clk *clk;
#ifdef CONFIG_GPIOLIB
struct gpio_chip gpio;
@@ -1434,7 +1433,8 @@ static void sc16is7xx_setup_irda_ports(struct sc16is7xx_port *s)
/*
* Configure ports designated to operate as modem control lines.
*/
-static int sc16is7xx_setup_mctrl_ports(struct sc16is7xx_port *s)
+static int sc16is7xx_setup_mctrl_ports(struct sc16is7xx_port *s,
+ struct regmap *regmap)
{
int i;
int ret;
@@ -1463,7 +1463,7 @@ static int sc16is7xx_setup_mctrl_ports(struct sc16is7xx_port *s)
if (s->mctrl_mask)
regmap_update_bits(
- s->regmap,
+ regmap,
SC16IS7XX_IOCONTROL_REG,
SC16IS7XX_IOCONTROL_MODEM_A_BIT |
SC16IS7XX_IOCONTROL_MODEM_B_BIT, s->mctrl_mask);
@@ -1495,6 +1495,10 @@ static int sc16is7xx_probe(struct device *dev,
* This device does not have an identification register that would
* tell us if we are really connected to the correct device.
* The best we can do is to check if communication is at all possible.
+ *
+ * Note: regmap[0] is used in the probe function to access registers
+ * common to all channels/ports, as it is guaranteed to be present on
+ * all variants.
*/
ret = regmap_read(regmaps[0], SC16IS7XX_LSR_REG, &val);
if (ret < 0)
@@ -1530,7 +1534,6 @@ static int sc16is7xx_probe(struct device *dev,
return -EINVAL;
}
- s->regmap = regmaps[0];
s->devtype = devtype;
dev_set_drvdata(dev, s);
mutex_init(&s->efr_lock);
@@ -1545,7 +1548,7 @@ static int sc16is7xx_probe(struct device *dev,
sched_set_fifo(s->kworker_task);
/* reset device, purging any pending irq / data */
- regmap_write(s->regmap, SC16IS7XX_IOCONTROL_REG,
+ regmap_write(regmaps[0], SC16IS7XX_IOCONTROL_REG,
SC16IS7XX_IOCONTROL_SRESET_BIT);
for (i = 0; i < devtype->nr_uart; ++i) {
@@ -1616,7 +1619,7 @@ static int sc16is7xx_probe(struct device *dev,
sc16is7xx_setup_irda_ports(s);
- ret = sc16is7xx_setup_mctrl_ports(s);
+ ret = sc16is7xx_setup_mctrl_ports(s, regmaps[0]);
if (ret)
goto out_ports;
--
2.43.0
