On Sat, 9 Dec 2023, Lino Sanfilippo wrote:
> If the RS485 feature RX-during-TX is supported by means of a GPIO set the
> according supported flag. Otherwise setting this feature from userspace may
> not be possible, since in uart_sanitize_serial_rs485() the passed RS485
> configuration is matched against the supported features and unsupported
> settings are thereby removed and thus take no effect.
>
> Cc: stable@xxxxxxxxxxxxxxx
> Fixes: 163f080eb717 ("serial: core: Add option to output RS485 RX_DURING_TX state via GPIO")
> Signed-off-by: Lino Sanfilippo <l.sanfilippo@xxxxxxxxxx>
> ---
> drivers/tty/serial/serial_core.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
> index a0290a5fe8b3..c254e88c8452 100644
> --- a/drivers/tty/serial/serial_core.c
> +++ b/drivers/tty/serial/serial_core.c
> @@ -3632,6 +3632,8 @@ int uart_get_rs485_mode(struct uart_port *port)
> if (IS_ERR(desc))
> return dev_err_probe(dev, PTR_ERR(desc), "Cannot get rs485-rx-during-tx-gpios\n");
> port->rs485_rx_during_tx_gpio = desc;
> + if (port->rs485_rx_during_tx_gpio)
> + port->rs485_supported.flags |= SER_RS485_RX_DURING_TX;
>
> return 0;
> }
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
--
i.
