This is an automatic generated email to let you know that the following patch were queued:
Subject: media: imx355: Enable runtime PM before registering async sub-device
Author: Bingbu Cao <bingbu.cao@xxxxxxxxx>
Date: Wed Nov 22 17:46:06 2023 +0800
As the sensor device maybe accessible right after its async sub-device is
registered, such as ipu-bridge will try to power up sensor by sensor's
client device's runtime PM from the async notifier callback, if runtime PM
is not enabled, it will fail.
So runtime PM should be ready before its async sub-device is registered
and accessible by others.
Fixes: df0b5c4a7ddd ("media: add imx355 camera sensor driver")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Bingbu Cao <bingbu.cao@xxxxxxxxx>
Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
drivers/media/i2c/imx355.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
---
diff --git a/drivers/media/i2c/imx355.c b/drivers/media/i2c/imx355.c
index e1b1d2fc79dd..8c995c58743a 100644
--- a/drivers/media/i2c/imx355.c
+++ b/drivers/media/i2c/imx355.c
@@ -1747,10 +1747,6 @@ static int imx355_probe(struct i2c_client *client)
goto error_handler_free;
}
- ret = v4l2_async_register_subdev_sensor(&imx355->sd);
- if (ret < 0)
- goto error_media_entity;
-
/*
* Device is already turned on by i2c-core with ACPI domain PM.
* Enable runtime PM and turn off the device.
@@ -1759,9 +1755,15 @@ static int imx355_probe(struct i2c_client *client)
pm_runtime_enable(&client->dev);
pm_runtime_idle(&client->dev);
+ ret = v4l2_async_register_subdev_sensor(&imx355->sd);
+ if (ret < 0)
+ goto error_media_entity_runtime_pm;
+
return 0;
-error_media_entity:
+error_media_entity_runtime_pm:
+ pm_runtime_disable(&client->dev);
+ pm_runtime_set_suspended(&client->dev);
media_entity_cleanup(&imx355->sd.entity);
error_handler_free:
