The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable@xxxxxxxxxxxxxxx>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 477865af60b2117ceaa1d558e03559108c15c78c # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable@xxxxxxxxxxxxxxx>' --in-reply-to '2023120348-devious-grafting-3f8d@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: 477865af60b2 ("mmc: sdhci-sprd: Fix vqmmc not shutting down after the card was pulled") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 477865af60b2117ceaa1d558e03559108c15c78c Mon Sep 17 00:00:00 2001 From: Wenchao Chen <wenchao.chen@xxxxxxxxxx> Date: Wed, 15 Nov 2023 16:34:06 +0800 Subject: [PATCH] mmc: sdhci-sprd: Fix vqmmc not shutting down after the card was pulled With cat regulator_summary, we found that vqmmc was not shutting down after the card was pulled. cat /sys/kernel/debug/regulator/regulator_summary 1.before fix 1)Insert SD card vddsdio 1 1 0 unknown 3500mV 0mA 1200mV 3750mV 71100000.mmc-vqmmc 1 0mA 3500mV 3600mV 2)Pull out the SD card vddsdio 1 1 0 unknown 3500mV 0mA 1200mV 3750mV 71100000.mmc-vqmmc 1 0mA 3500mV 3600mV 2.after fix 1)Insert SD cardt vddsdio 1 1 0 unknown 3500mV 0mA 1200mV 3750mV 71100000.mmc-vqmmc 1 0mA 3500mV 3600mV 2)Pull out the SD card vddsdio 0 1 0 unknown 3500mV 0mA 1200mV 3750mV 71100000.mmc-vqmmc 0 0mA 3500mV 3600mV Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Signed-off-by: Wenchao Chen <wenchao.chen@xxxxxxxxxx> Cc: stable@xxxxxxxxxxxxxxx Link: https://lore.kernel.org/r/20231115083406.7368-1-wenchao.chen@xxxxxxxxxx Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx> diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c index 6b84ba27e6ab..6b8a57e2d20f 100644 --- a/drivers/mmc/host/sdhci-sprd.c +++ b/drivers/mmc/host/sdhci-sprd.c @@ -416,12 +416,33 @@ static void sdhci_sprd_request_done(struct sdhci_host *host, mmc_request_done(host->mmc, mrq); } +static void sdhci_sprd_set_power(struct sdhci_host *host, unsigned char mode, + unsigned short vdd) +{ + struct mmc_host *mmc = host->mmc; + + switch (mode) { + case MMC_POWER_OFF: + mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc, 0); + + mmc_regulator_disable_vqmmc(mmc); + break; + case MMC_POWER_ON: + mmc_regulator_enable_vqmmc(mmc); + break; + case MMC_POWER_UP: + mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc, vdd); + break; + } +} + static struct sdhci_ops sdhci_sprd_ops = { .read_l = sdhci_sprd_readl, .write_l = sdhci_sprd_writel, .write_w = sdhci_sprd_writew, .write_b = sdhci_sprd_writeb, .set_clock = sdhci_sprd_set_clock, + .set_power = sdhci_sprd_set_power, .get_max_clock = sdhci_sprd_get_max_clock, .get_min_clock = sdhci_sprd_get_min_clock, .set_bus_width = sdhci_set_bus_width, @@ -823,6 +844,10 @@ static int sdhci_sprd_probe(struct platform_device *pdev) host->caps1 &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_DDR50); + ret = mmc_regulator_get_supply(host->mmc); + if (ret) + goto pm_runtime_disable; + ret = sdhci_setup_host(host); if (ret) goto pm_runtime_disable;
