The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable@xxxxxxxxxxxxxxx>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x 1de1b77982e1a1df9707cb11f9b1789e6b8919d4 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable@xxxxxxxxxxxxxxx>' --in-reply-to '2023120324-last-vista-7454@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: 1de1b77982e1 ("mmc: cqhci: Fix task clearing in CQE error recovery") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 1de1b77982e1a1df9707cb11f9b1789e6b8919d4 Mon Sep 17 00:00:00 2001 From: Adrian Hunter <adrian.hunter@xxxxxxxxx> Date: Fri, 3 Nov 2023 10:47:20 +0200 Subject: [PATCH] mmc: cqhci: Fix task clearing in CQE error recovery MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If a task completion notification (TCN) is received when there is no outstanding task, the cqhci driver issues a "spurious TCN" warning. This was observed to happen right after CQE error recovery. When an error interrupt is received the driver runs recovery logic. It halts the controller, clears all pending tasks, and then re-enables it. On some platforms, like Intel Jasper Lake, a stale task completion event was observed, regardless of the CQHCI_CLEAR_ALL_TASKS bit being set. This results in either: a) Spurious TC completion event for an empty slot. b) Corrupted data being passed up the stack, as a result of premature completion for a newly added task. Rather than add a quirk for affected controllers, ensure tasks are cleared by toggling CQHCI_ENABLE, which would happen anyway if cqhci_clear_all_tasks() timed out. This is simpler and should be safe and effective for all controllers. Fixes: a4080225f51d ("mmc: cqhci: support for command queue enabled host") Cc: stable@xxxxxxxxxxxxxxx Reported-by: Kornel Dulęba <korneld@xxxxxxxxxxxx> Tested-by: Kornel Dulęba <korneld@xxxxxxxxxxxx> Co-developed-by: Kornel Dulęba <korneld@xxxxxxxxxxxx> Signed-off-by: Kornel Dulęba <korneld@xxxxxxxxxxxx> Signed-off-by: Adrian Hunter <adrian.hunter@xxxxxxxxx> Reviewed-by: Avri Altman <avri.altman@xxxxxxx> Link: https://lore.kernel.org/r/20231103084720.6886-7-adrian.hunter@xxxxxxxxx Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx> diff --git a/drivers/mmc/host/cqhci-core.c b/drivers/mmc/host/cqhci-core.c index 948799a0980c..41e94cd14109 100644 --- a/drivers/mmc/host/cqhci-core.c +++ b/drivers/mmc/host/cqhci-core.c @@ -1075,28 +1075,28 @@ static void cqhci_recovery_finish(struct mmc_host *mmc) ok = cqhci_halt(mmc, CQHCI_FINISH_HALT_TIMEOUT); - if (!cqhci_clear_all_tasks(mmc, CQHCI_CLEAR_TIMEOUT)) - ok = false; - /* * The specification contradicts itself, by saying that tasks cannot be * cleared if CQHCI does not halt, but if CQHCI does not halt, it should * be disabled/re-enabled, but not to disable before clearing tasks. * Have a go anyway. */ - if (!ok) { - pr_debug("%s: cqhci: disable / re-enable\n", mmc_hostname(mmc)); - cqcfg = cqhci_readl(cq_host, CQHCI_CFG); - cqcfg &= ~CQHCI_ENABLE; - cqhci_writel(cq_host, cqcfg, CQHCI_CFG); - cqcfg |= CQHCI_ENABLE; - cqhci_writel(cq_host, cqcfg, CQHCI_CFG); - /* Be sure that there are no tasks */ - ok = cqhci_halt(mmc, CQHCI_FINISH_HALT_TIMEOUT); - if (!cqhci_clear_all_tasks(mmc, CQHCI_CLEAR_TIMEOUT)) - ok = false; - WARN_ON(!ok); - } + if (!cqhci_clear_all_tasks(mmc, CQHCI_CLEAR_TIMEOUT)) + ok = false; + + /* Disable to make sure tasks really are cleared */ + cqcfg = cqhci_readl(cq_host, CQHCI_CFG); + cqcfg &= ~CQHCI_ENABLE; + cqhci_writel(cq_host, cqcfg, CQHCI_CFG); + + cqcfg = cqhci_readl(cq_host, CQHCI_CFG); + cqcfg |= CQHCI_ENABLE; + cqhci_writel(cq_host, cqcfg, CQHCI_CFG); + + cqhci_halt(mmc, CQHCI_FINISH_HALT_TIMEOUT); + + if (!ok) + cqhci_clear_all_tasks(mmc, CQHCI_CLEAR_TIMEOUT); cqhci_recover_mrqs(cq_host);
