On 21-11-23 07:29 pm, Prashanth K wrote:
drivers/usb/dwc3/host.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index 61f57fe5bb78..ee3b667a88b2 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -11,6 +11,7 @@
#include <linux/of.h>
#include <linux/platform_device.h>
+#include "../host/xhci-plat.h"
#include "core.h"
static void dwc3_host_fill_xhci_irq_res(struct dwc3 *dwc,
@@ -63,6 +64,7 @@ int dwc3_host_init(struct dwc3 *dwc)
{
struct property_entry props[4];
struct platform_device *xhci;
+ struct xhci_plat_priv dwc3_xhci_plat_priv;
int ret, irq;
int prop_idx = 0;
@@ -87,6 +89,14 @@ int dwc3_host_init(struct dwc3 *dwc)
goto err;
}
+ memset(&dwc3_xhci_plat_priv, 0, sizeof(struct xhci_plat_priv));
+
+ dwc3_xhci_plat_priv.quirks |= XHCI_SG_TRB_CACHE_SIZE_QUIRK;
+ ret = platform_device_add_data(xhci, &dwc3_xhci_plat_priv,
+ sizeof(dwc3_xhci_plat_priv));
+ if (ret)
+ goto err;
+
memset(props, 0, sizeof(struct property_entry) * ARRAY_SIZE(props));
if (dwc->usb3_lpm_capable)
Is the above approach acceptable? I'm not sure if accessing xhci-plat's
structure from dwc3 is a recommended way. If not, then can we go ahead
with the following approach where we add a property to XHCI SW node.
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -89,6 +89,8 @@ int dwc3_host_init(struct dwc3 *dwc)
memset(props, 0, sizeof(struct property_entry) *
ARRAY_SIZE(props));
+ props[prop_idx++] =
PROPERTY_ENTRY_BOOL("xhci-sg-trb-cache-size-quirk");
+
if (dwc->usb3_lpm_capable)
props[prop_idx++] =
PROPERTY_ENTRY_BOOL("usb3-lpm-capable");
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -323,6 +323,9 @@ static int xhci_plat_probe(struct platform_device *pdev)
if (device_property_read_bool(tmpdev,
"quirk-broken-port-ped"))
xhci->quirks |= XHCI_BROKEN_PORT_PED;
+ if (device_property_read_bool(tmpdev,
"xhci-sg-trb-cache-size-quirk"))
+ xhci->quirks |= XHCI_SG_TRB_CACHE_SIZE_QUIRK;
+
device_property_read_u32(tmpdev, "imod-interval-ns",
&xhci->imod_interval);
}
Regards,
Prashanth K
