From: Ulrich Eckhardt <uli-lirc@xxxxxxxxxxxxxxx> 3.12-stable review patch. If anyone has any objections, please let me know. =============== commit 8c5bcded11cb607b1bb5920de3b9c882136d27db upstream. The Tevii S480 outputs 18V on startup for the LNB supply voltage and does not automatically power down. This blocks other receivers connected to a satellite channel router (EN50494), since the receivers can not send the required DiSEqC sequences when the Tevii card is connected to a the same SCR. This patch switches off the LNB supply voltage on initialization of the frontend. [mchehab@xxxxxxxxxxxxxxx: add a comment about why we're explicitly turning off voltage at device init] Signed-off-by: Ulrich Eckhardt <uli@xxxxxxxxxxxxxxx> Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxx> Signed-off-by: Jiri Slaby <jslaby@xxxxxxx> --- drivers/media/dvb-frontends/ds3000.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/media/dvb-frontends/ds3000.c b/drivers/media/dvb-frontends/ds3000.c index 1e344b033277..22e8c2032f6d 100644 --- a/drivers/media/dvb-frontends/ds3000.c +++ b/drivers/media/dvb-frontends/ds3000.c @@ -864,6 +864,13 @@ struct dvb_frontend *ds3000_attach(const struct ds3000_config *config, memcpy(&state->frontend.ops, &ds3000_ops, sizeof(struct dvb_frontend_ops)); state->frontend.demodulator_priv = state; + + /* + * Some devices like T480 starts with voltage on. Be sure + * to turn voltage off during init, as this can otherwise + * interfere with Unicable SCR systems. + */ + ds3000_set_voltage(&state->frontend, SEC_VOLTAGE_OFF); return &state->frontend; error3: -- 2.1.3 -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html