[PATCH 2/3] USB: dwc3: qcom: fix software node leak on probe errors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Make sure to remove the software node also on (ACPI) probe errors to
avoid leaking the underlying resources.

Note that the software node is only used for ACPI probe so the driver
unbind tear down is updated to match probe.

Fixes: 8dc6e6dd1bee ("usb: dwc3: qcom: Constify the software node")
Cc: stable@xxxxxxxxxxxxxxx      # 5.12
Cc: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
 drivers/usb/dwc3/dwc3-qcom.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 00c3021b43ce..0703f9b85cda 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -932,10 +932,12 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
 interconnect_exit:
 	dwc3_qcom_interconnect_exit(qcom);
 depopulate:
-	if (np)
+	if (np) {
 		of_platform_depopulate(&pdev->dev);
-	else
+	} else {
+		device_remove_software_node(&qcom->dwc3->dev);
 		platform_device_del(qcom->dwc3);
+	}
 	platform_device_put(qcom->dwc3);
 clk_disable:
 	for (i = qcom->num_clocks - 1; i >= 0; i--) {
@@ -955,11 +957,12 @@ static void dwc3_qcom_remove(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	int i;
 
-	device_remove_software_node(&qcom->dwc3->dev);
-	if (np)
+	if (np) {
 		of_platform_depopulate(&pdev->dev);
-	else
+	} else {
+		device_remove_software_node(&qcom->dwc3->dev);
 		platform_device_del(qcom->dwc3);
+	}
 	platform_device_put(qcom->dwc3);
 
 	for (i = qcom->num_clocks - 1; i >= 0; i--) {
-- 
2.41.0




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux