From: Chris Morgan <macromorgan@xxxxxxxxxxx> [ Upstream commit aee432b50f6e15886bddcb6f92028265db4b254e ] Enable USB2 (EHCI and OCHI mode) support for the Indiedroid Nova. This adds support for USB for the 4 full size USB-A ports. Note that USB 3 (the two blue full-size USB-A ports) is still outstanding, as is support for USB on the USB-C ports. The controller is not yet supported for these ports. Signed-off-by: Chris Morgan <macromorgan@xxxxxxxxxxx> Link: https://lore.kernel.org/r/20230918173255.1325-3-macroalpha82@xxxxxxxxx Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- .../dts/rockchip/rk3588s-indiedroid-nova.dts | 34 +++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts index 646f49cc9e53d..1e2336d3065b0 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts @@ -751,6 +751,24 @@ &tsadc { status = "okay"; }; +&u2phy2 { + status = "okay"; +}; + +&u2phy2_host { + phy-supply = <&vcc5v0_usb>; + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy3_host { + phy-supply = <&vcc5v0_usb>; + status = "okay"; +}; + &uart2 { pinctrl-0 = <&uart2m0_xfer>; status = "okay"; @@ -775,3 +793,19 @@ bluetooth { pinctrl-names = "default"; }; }; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; -- 2.42.0
