Re: Intermittent storage (dm-crypt?) freeze - regression 6.4->6.5

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Nov 01, 2023 at 03:14:22AM +0100, Marek Marczykowski-Górecki wrote:
> On Wed, Nov 01, 2023 at 09:27:24AM +0800, Ming Lei wrote:
> > On Tue, Oct 31, 2023 at 11:42 PM Marek Marczykowski-Górecki
> > <marmarek@xxxxxxxxxxxxxxxxxxxxxx> wrote:
> > >
> > > On Tue, Oct 31, 2023 at 03:01:36PM +0100, Jan Kara wrote:
> > > > On Tue 31-10-23 04:48:44, Marek Marczykowski-Górecki wrote:
> > > > > Then tried:
> > > > >  - PAGE_ALLOC_COSTLY_ORDER=4, order=4 - cannot reproduce,
> > > > >  - PAGE_ALLOC_COSTLY_ORDER=4, order=5 - cannot reproduce,
> > > > >  - PAGE_ALLOC_COSTLY_ORDER=4, order=6 - freeze rather quickly
> > > > >
> > > > > I've retried the PAGE_ALLOC_COSTLY_ORDER=4,order=5 case several times
> > > > > and I can't reproduce the issue there. I'm confused...
> > > >
> > > > And this kind of confirms that allocations > PAGE_ALLOC_COSTLY_ORDER
> > > > causing hangs is most likely just a coincidence. Rather something either in
> > > > the block layer or in the storage driver has problems with handling bios
> > > > with sufficiently high order pages attached. This is going to be a bit
> > > > painful to debug I'm afraid. How long does it take for you trigger the
> > > > hang? I'm asking to get rough estimate how heavy tracing we can afford so
> > > > that we don't overwhelm the system...
> > >
> > > Sometimes it freezes just after logging in, but in worst case it takes
> > > me about 10min of more or less `tar xz` + `dd`.
> > 
> > blk-mq debugfs is usually helpful for hang issue in block layer or
> > underlying drivers:
> > 
> > (cd /sys/kernel/debug/block && find . -type f -exec grep -aH . {} \;)
> > 
> > BTW,  you can just collect logs of the exact disks if you know what
> > are behind dm-crypt,
> > which can be figured out by `lsblk`, and it has to be collected after
> > the hang is triggered.
> 
> dm-crypt lives on the nvme disk, this is what I collected when it
> hanged:
> 
...
> nvme0n1/hctx4/cpu4/default_rq_list:000000000d41998f {.op=READ, .cmd_flags=, .rq_flags=IO_STAT, .state=idle, .tag=65, .internal_tag=-1}
> nvme0n1/hctx4/cpu4/default_rq_list:00000000d0d04ed2 {.op=READ, .cmd_flags=, .rq_flags=IO_STAT, .state=idle, .tag=70, .internal_tag=-1}

Two requests stays in sw queue, but not related with this issue.

> nvme0n1/hctx4/type:default
> nvme0n1/hctx4/dispatch_busy:9

non-zero dispatch_busy means BLK_STS_RESOURCE is returned from
nvme_queue_rq() recently and mostly.

> nvme0n1/hctx4/active:0
> nvme0n1/hctx4/run:20290468

...

> nvme0n1/hctx4/tags:nr_tags=1023
> nvme0n1/hctx4/tags:nr_reserved_tags=0
> nvme0n1/hctx4/tags:active_queues=0
> nvme0n1/hctx4/tags:bitmap_tags:
> nvme0n1/hctx4/tags:depth=1023
> nvme0n1/hctx4/tags:busy=3

Just three requests in-flight, two are in sw queue, another is in hctx->dispatch.

...

> nvme0n1/hctx4/dispatch:00000000b335fa89 {.op=WRITE, .cmd_flags=NOMERGE, .rq_flags=DONTPREP|IO_STAT, .state=idle, .tag=78, .internal_tag=-1}
> nvme0n1/hctx4/flags:alloc_policy=FIFO SHOULD_MERGE
> nvme0n1/hctx4/state:SCHED_RESTART

The request staying in hctx->dispatch can't move on, and nvme_queue_rq()
returns -BLK_STS_RESOURCE constantly, and you can verify with
the following bpftrace when the hang is triggered:

	bpftrace -e 'kretfunc:nvme_queue_rq  { @[retval, kstack]=count() }'

It is very likely that memory allocation inside nvme_queue_rq()
can't be done successfully, then blk-mq just have to retry by calling
nvme_queue_rq() on the above request.


Thanks,
Ming



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux