6.1-stable review patch. If anyone has any objections, please let me know. ------------------ From: Ulf Hansson <ulf.hansson@xxxxxxxxxx> [ Upstream commit 51f5b3056790bc0518e49587996f1e6f3058cca9 ] Let's align to the common busy polling behaviour for mmc ioctls, by updating the below two corresponding parts, that comes into play when using an R1B response for a command. *) A command with an R1B response should be prepared by calling mmc_prepare_busy_cmd(), which make us respects the host's busy timeout constraints. **) When an R1B response is being used and the host also supports HW busy detection, we should skip to poll for busy completion. Suggested-by: Christian Loehle <cloehle@xxxxxxxxxxxxxx> Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx> Reviewed-by: Christian Loehle <cloehle@xxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20230213133707.27857-1-ulf.hansson@xxxxxxxxxx Stable-dep-of: f19c5a73e6f7 ("mmc: core: Fix error propagation for some ioctl commands") Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/mmc/core/block.c | 25 +++++++++++++++++-------- drivers/mmc/core/mmc_ops.c | 1 + 2 files changed, 18 insertions(+), 8 deletions(-) diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index cdd7f126d4aea..baefe2886f0b2 100644 --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -471,6 +471,8 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md, struct mmc_data data = {}; struct mmc_request mrq = {}; struct scatterlist sg; + bool r1b_resp, use_r1b_resp = false; + unsigned int busy_timeout_ms; int err; unsigned int target_part; @@ -559,6 +561,13 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md, (cmd.opcode == MMC_SWITCH)) return mmc_sanitize(card, idata->ic.cmd_timeout_ms); + /* If it's an R1B response we need some more preparations. */ + busy_timeout_ms = idata->ic.cmd_timeout_ms ? : MMC_BLK_TIMEOUT_MS; + r1b_resp = (cmd.flags & MMC_RSP_R1B) == MMC_RSP_R1B; + if (r1b_resp) + use_r1b_resp = mmc_prepare_busy_cmd(card->host, &cmd, + busy_timeout_ms); + mmc_wait_for_req(card->host, &mrq); memcpy(&idata->ic.response, cmd.resp, sizeof(cmd.resp)); @@ -610,14 +619,14 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md, if (idata->ic.postsleep_min_us) usleep_range(idata->ic.postsleep_min_us, idata->ic.postsleep_max_us); - if (idata->rpmb || (cmd.flags & MMC_RSP_R1B) == MMC_RSP_R1B) { - /* - * Ensure RPMB/R1B command has completed by polling CMD13 "Send Status". Here we - * allow to override the default timeout value if a custom timeout is specified. - */ - err = mmc_poll_for_busy(card, idata->ic.cmd_timeout_ms ? : MMC_BLK_TIMEOUT_MS, - false, MMC_BUSY_IO); - } + /* No need to poll when using HW busy detection. */ + if ((card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp) + return 0; + + /* Ensure RPMB/R1B command has completed by polling with CMD13. */ + if (idata->rpmb || r1b_resp) + err = mmc_poll_for_busy(card, busy_timeout_ms, false, + MMC_BUSY_IO); return err; } diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c index 81c55bfd6e0c2..3b3adbddf6641 100644 --- a/drivers/mmc/core/mmc_ops.c +++ b/drivers/mmc/core/mmc_ops.c @@ -575,6 +575,7 @@ bool mmc_prepare_busy_cmd(struct mmc_host *host, struct mmc_command *cmd, cmd->busy_timeout = timeout_ms; return true; } +EXPORT_SYMBOL_GPL(mmc_prepare_busy_cmd); /** * __mmc_switch - modify EXT_CSD register -- 2.42.0
