[PATCH 5.10 109/202] net: rfkill: gpio: prevent value glitch during probe

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Josua Mayer <josua@xxxxxxxxxxxxx>

commit b2f750c3a80b285cd60c9346f8c96bd0a2a66cde upstream.

When either reset- or shutdown-gpio have are initially deasserted,
e.g. after a reboot - or when the hardware does not include pull-down,
there will be a short toggle of both IOs to logical 0 and back to 1.

It seems that the rfkill default is unblocked, so the driver should not
glitch to output low during probe.
It can lead e.g. to unexpected lte modem reconnect:

[1] root@localhost:~# dmesg | grep "usb 2-1"
[    2.136124] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[   21.215278] usb 2-1: USB disconnect, device number 2
[   28.833977] usb 2-1: new SuperSpeed USB device number 3 using xhci-hcd

The glitch has been discovered on an arm64 board, now that device-tree
support for the rfkill-gpio driver has finally appeared :).

Change the flags for devm_gpiod_get_optional from GPIOD_OUT_LOW to
GPIOD_ASIS to avoid any glitches.
The rfkill driver will set the intended value during rfkill_sync_work.

Fixes: 7176ba23f8b5 ("net: rfkill: add generic gpio rfkill driver")
Signed-off-by: Josua Mayer <josua@xxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20231004163928.14609-1-josua@xxxxxxxxxxxxx
Signed-off-by: Johannes Berg <johannes.berg@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 net/rfkill/rfkill-gpio.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/net/rfkill/rfkill-gpio.c
+++ b/net/rfkill/rfkill-gpio.c
@@ -98,13 +98,13 @@ static int rfkill_gpio_probe(struct plat
 
 	rfkill->clk = devm_clk_get(&pdev->dev, NULL);
 
-	gpio = devm_gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW);
+	gpio = devm_gpiod_get_optional(&pdev->dev, "reset", GPIOD_ASIS);
 	if (IS_ERR(gpio))
 		return PTR_ERR(gpio);
 
 	rfkill->reset_gpio = gpio;
 
-	gpio = devm_gpiod_get_optional(&pdev->dev, "shutdown", GPIOD_OUT_LOW);
+	gpio = devm_gpiod_get_optional(&pdev->dev, "shutdown", GPIOD_ASIS);
 	if (IS_ERR(gpio))
 		return PTR_ERR(gpio);
 





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux