6.1-stable review patch. If anyone has any objections, please let me know. ------------------ From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx> [ Upstream commit 8e90cf29aef77b59ed6a6f6466add2af79621f26 ] Move uart_change_speed() earlier to get rid of its forward declaration. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20230309080923.11778-5-ilpo.jarvinen@xxxxxxxxxxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> Stable-dep-of: 8679328eb859 ("serial: Reduce spinlocked portion of uart_rs485_config()") Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/tty/serial/serial_core.c | 94 ++++++++++++++++---------------- 1 file changed, 46 insertions(+), 48 deletions(-) diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 2cc5c68c8689f..07e694c4f4827 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -48,8 +48,6 @@ static struct lock_class_key port_lock_key; */ #define RS485_MAX_RTS_DELAY 100 /* msecs */ -static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, - const struct ktermios *old_termios); static void uart_wait_until_sent(struct tty_struct *tty, int timeout); static void uart_change_pm(struct uart_state *state, enum uart_pm_state pm_state); @@ -177,6 +175,52 @@ static void uart_port_dtr_rts(struct uart_port *uport, int raise) uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS); } +/* Caller holds port mutex */ +static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, + const struct ktermios *old_termios) +{ + struct uart_port *uport = uart_port_check(state); + struct ktermios *termios; + int hw_stopped; + + /* + * If we have no tty, termios, or the port does not exist, + * then we can't set the parameters for this port. + */ + if (!tty || uport->type == PORT_UNKNOWN) + return; + + termios = &tty->termios; + uport->ops->set_termios(uport, termios, old_termios); + + /* + * Set modem status enables based on termios cflag + */ + spin_lock_irq(&uport->lock); + if (termios->c_cflag & CRTSCTS) + uport->status |= UPSTAT_CTS_ENABLE; + else + uport->status &= ~UPSTAT_CTS_ENABLE; + + if (termios->c_cflag & CLOCAL) + uport->status &= ~UPSTAT_DCD_ENABLE; + else + uport->status |= UPSTAT_DCD_ENABLE; + + /* reset sw-assisted CTS flow control based on (possibly) new mode */ + hw_stopped = uport->hw_stopped; + uport->hw_stopped = uart_softcts_mode(uport) && + !(uport->ops->get_mctrl(uport) & TIOCM_CTS); + if (uport->hw_stopped) { + if (!hw_stopped) + uport->ops->stop_tx(uport); + } else { + if (hw_stopped) + __uart_start(tty); + } + spin_unlock_irq(&uport->lock); +} + /* * Startup the port. This will be called once per open. All calls * will be serialised by the per-port mutex. @@ -485,52 +529,6 @@ uart_get_divisor(struct uart_port *port, unsigned int baud) } EXPORT_SYMBOL(uart_get_divisor); -/* Caller holds port mutex */ -static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, - const struct ktermios *old_termios) -{ - struct uart_port *uport = uart_port_check(state); - struct ktermios *termios; - int hw_stopped; - - /* - * If we have no tty, termios, or the port does not exist, - * then we can't set the parameters for this port. - */ - if (!tty || uport->type == PORT_UNKNOWN) - return; - - termios = &tty->termios; - uport->ops->set_termios(uport, termios, old_termios); - - /* - * Set modem status enables based on termios cflag - */ - spin_lock_irq(&uport->lock); - if (termios->c_cflag & CRTSCTS) - uport->status |= UPSTAT_CTS_ENABLE; - else - uport->status &= ~UPSTAT_CTS_ENABLE; - - if (termios->c_cflag & CLOCAL) - uport->status &= ~UPSTAT_DCD_ENABLE; - else - uport->status |= UPSTAT_DCD_ENABLE; - - /* reset sw-assisted CTS flow control based on (possibly) new mode */ - hw_stopped = uport->hw_stopped; - uport->hw_stopped = uart_softcts_mode(uport) && - !(uport->ops->get_mctrl(uport) & TIOCM_CTS); - if (uport->hw_stopped) { - if (!hw_stopped) - uport->ops->stop_tx(uport); - } else { - if (hw_stopped) - __uart_start(tty); - } - spin_unlock_irq(&uport->lock); -} - static int uart_put_char(struct tty_struct *tty, unsigned char c) { struct uart_state *state = tty->driver_data; -- 2.40.1
