DisplayPort Alt Mode CTS test 10.3.8 states that both sides of the
connection shall be compatible with one another such that the connection
is not Source to Source or Sink to Sink.
The DisplayPort driver currently checks for a compatible pin configuration
that resolves into a source and sink combination. The CTS test is designed
to send a Discover Modes message that has a compatible pin configuration
but advertises the same port capability as the device; the current check
fails this.
Verify that the port and port partner resolve into a valid source and sink
combination before checking for a compatible pin configuration.
Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: RD Babiera <rdbabiera@xxxxxxxxxx>
---
drivers/usb/typec/altmodes/displayport.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c
index 718da02036d8..3b35a6b8cb72 100644
--- a/drivers/usb/typec/altmodes/displayport.c
+++ b/drivers/usb/typec/altmodes/displayport.c
@@ -575,9 +575,18 @@ int dp_altmode_probe(struct typec_altmode *alt)
struct fwnode_handle *fwnode;
struct dp_altmode *dp;
int ret;
+ int port_cap, partner_cap;
/* FIXME: Port can only be DFP_U. */
+ /* Make sure that the port and partner can resolve into source and sink */
+ port_cap = DP_CAP_CAPABILITY(port->vdo);
+ partner_cap = DP_CAP_CAPABILITY(alt->vdo);
+ if (!((port_cap & DP_CAP_DFP_D) && (partner_cap & DP_CAP_UFP_D)) &&
+ !((port_cap & DP_CAP_UFP_D) && (partner_cap & DP_CAP_DFP_D))) {
+ return -ENODEV;
+ }
+
/* Make sure we have compatiple pin configurations */
if (!(DP_CAP_PIN_ASSIGN_DFP_D(port->vdo) &
DP_CAP_PIN_ASSIGN_UFP_D(alt->vdo)) &&
base-commit: d0d27ef87e1ca974ed93ed4f7d3c123cbd392ba6
--
2.42.0.655.g421f12c284-goog
