6.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mario Limonciello <mario.limonciello@xxxxxxx>
commit c9ca8de2eb15f9da24113e652980c61f95a47530 upstream.
On some OEM systems, adding a W7900 dGPU triggers RAS errors and hangs
at a black screen on startup. This issue occurs only if `ucsi_acpi` has
loaded before `amdgpu` has loaded. The reason for this failure is that
`amdgpu` uses power_supply_is_system_supplied() to determine if running
on AC or DC power at startup. If this value is reported incorrectly the
dGPU will also be programmed incorrectly and trigger errors.
power_supply_is_system_supplied() reports the wrong value because UCSI
power supplies provided as part of the system don't properly report the
scope as "DEVICE" scope (not powering the system).
In order to fix this issue check the capabilities reported from the UCSI
power supply to ensure that it supports charging a battery and that it can
be powered by AC. Mark the scope accordingly.
Cc: stable@xxxxxxxxxxxxxxx
Fixes: a7fbfd44c020 ("usb: typec: ucsi: Mark dGPUs as DEVICE scope")
Link: https://www.intel.com/content/www/us/en/products/docs/io/universal-serial-bus/usb-type-c-ucsi-spec.html p28
Reviewed-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
Signed-off-by: Mario Limonciello <mario.limonciello@xxxxxxx>
Acked-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20231009184643.129986-1-mario.limonciello@xxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/typec/ucsi/psy.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/drivers/usb/typec/ucsi/psy.c
+++ b/drivers/usb/typec/ucsi/psy.c
@@ -37,6 +37,15 @@ static int ucsi_psy_get_scope(struct ucs
struct device *dev = con->ucsi->dev;
device_property_read_u8(dev, "scope", &scope);
+ if (scope == POWER_SUPPLY_SCOPE_UNKNOWN) {
+ u32 mask = UCSI_CAP_ATTR_POWER_AC_SUPPLY |
+ UCSI_CAP_ATTR_BATTERY_CHARGING;
+
+ if (con->ucsi->cap.attributes & mask)
+ scope = POWER_SUPPLY_SCOPE_SYSTEM;
+ else
+ scope = POWER_SUPPLY_SCOPE_DEVICE;
+ }
val->intval = scope;
return 0;
}
