[PATCH 5.15 064/102] thunderbolt: Check that lane 1 is in CL0 before enabling lane bonding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>

commit a9fdf5f933a6f2b358fad0194b1287b67f6704b1 upstream.

Marek reported that when BlackMagic UltraStudio device is connected the
kernel repeatedly tries to enable lane bonding without success making
the device non-functional. It looks like the device does not have lane 1
connected at all so even though it is enabled we should not try to bond
the lanes. For this reason check that lane 1 is in fact CL0 (connected,
active) before attempting to bond the lanes.

Reported-by: Marek Šanta <teslan223@xxxxxxxxx>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217737
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/thunderbolt/switch.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -2552,6 +2552,13 @@ int tb_switch_lane_bonding_enable(struct
 	    !tb_port_is_width_supported(down, 2))
 		return 0;
 
+	/*
+	 * Both lanes need to be in CL0. Here we assume lane 0 already be in
+	 * CL0 and check just for lane 1.
+	 */
+	if (tb_wait_for_port(down->dual_link_port, false) <= 0)
+		return -ENOTCONN;
+
 	ret = tb_port_lane_bonding_enable(up);
 	if (ret) {
 		tb_port_warn(up, "failed to enable lane bonding\n");





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux