6.1-stable review patch. If anyone has any objections, please let me know. ------------------ From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx> commit f9315f17bf778cb8079a29639419fcc8a41a3c84 upstream. pinctrl_gpio_set_config() expects the GPIO number from the global GPIO numberspace, not the controller-relative offset, which needs to be added to the chip base. Fixes: 5ae4cb94b313 ("gpio: aspeed: Add debounce support") Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx> Reviewed-by: Andy Shevchenko <andy@xxxxxxxxxx> Reviewed-by: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/gpio/gpio-aspeed.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/gpio/gpio-aspeed.c +++ b/drivers/gpio/gpio-aspeed.c @@ -963,7 +963,7 @@ static int aspeed_gpio_set_config(struct else if (param == PIN_CONFIG_BIAS_DISABLE || param == PIN_CONFIG_BIAS_PULL_DOWN || param == PIN_CONFIG_DRIVE_STRENGTH) - return pinctrl_gpio_set_config(offset, config); + return pinctrl_gpio_set_config(chip->base + offset, config); else if (param == PIN_CONFIG_DRIVE_OPEN_DRAIN || param == PIN_CONFIG_DRIVE_OPEN_SOURCE) /* Return -ENOTSUPP to trigger emulation, as per datasheet */