5.15-stable review patch. If anyone has any objections, please let me know. ------------------ From: Michal Grzedzicki <mge@xxxxxxxx> [ Upstream commit 71996bb835aed58c7ec4967be1d05190a27339ec ] Some cards have more than one SAS address. Using an incorrect address causes communication issues with some devices like expanders. Closes: https://lore.kernel.org/linux-kernel/A57AEA84-5CA0-403E-8053-106033C73C70@xxxxxx/ Signed-off-by: Michal Grzedzicki <mge@xxxxxxxx> Link: https://lore.kernel.org/r/20230913155611.3183612-1-mge@xxxxxxxx Acked-by: Jack Wang <jinpu.wang@xxxxxxxxx> Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/scsi/pm8001/pm8001_hwi.c | 2 +- drivers/scsi/pm8001/pm80xx_hwi.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 32fc450bf84b4..352705e023c83 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -4402,7 +4402,7 @@ pm8001_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id) payload.sas_identify.dev_type = SAS_END_DEVICE; payload.sas_identify.initiator_bits = SAS_PROTOCOL_ALL; memcpy(payload.sas_identify.sas_addr, - pm8001_ha->sas_addr, SAS_ADDR_SIZE); + &pm8001_ha->phy[phy_id].dev_sas_addr, SAS_ADDR_SIZE); payload.sas_identify.phy_id = phy_id; ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opcode, &payload, sizeof(payload), 0); diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index 04746df26c6c9..ea305d093c871 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -4814,7 +4814,7 @@ pm80xx_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id) payload.sas_identify.dev_type = SAS_END_DEVICE; payload.sas_identify.initiator_bits = SAS_PROTOCOL_ALL; memcpy(payload.sas_identify.sas_addr, - &pm8001_ha->sas_addr, SAS_ADDR_SIZE); + &pm8001_ha->phy[phy_id].dev_sas_addr, SAS_ADDR_SIZE); payload.sas_identify.phy_id = phy_id; ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opcode, &payload, sizeof(payload), 0); -- 2.40.1
