From: Lino Sanfilippo <l.sanfilippo@xxxxxxxxxx> Some uart drivers specify a rs485_config() function and then decide later to disable RS485 support for some reason (e.g. imx and ar933). In these cases userspace may be able to activate RS485 via TIOCSRS485 nevertheless, since in uart_set_rs485_config() an existing rs485_config() function indicates that RS485 is supported. Make sure that this is not longer possible by checking the uarts rs485_supported.flags instead and bailing out if SER_RS485_ENABLED is not set. Furthermore instead of returning an empty structure return -ENOTTY if the RS485 configuration is requested via TIOCGRS485 but RS485 is not supported. Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Lino Sanfilippo <l.sanfilippo@xxxxxxxxxx> --- drivers/tty/serial/serial_core.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index f4feebf8200f..dca09877fabc 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -1432,6 +1432,9 @@ static int uart_get_rs485_config(struct uart_port *port, unsigned long flags; struct serial_rs485 aux; + if (!(port->rs485_supported.flags & SER_RS485_ENABLED)) + return -ENOTTY; + spin_lock_irqsave(&port->lock, flags); aux = port->rs485; spin_unlock_irqrestore(&port->lock, flags); @@ -1449,7 +1452,7 @@ static int uart_set_rs485_config(struct tty_struct *tty, struct uart_port *port, int ret; unsigned long flags; - if (!port->rs485_config) + if (!(port->rs485_supported.flags & SER_RS485_ENABLED)) return -ENOTTY; if (copy_from_user(&rs485, rs485_user, sizeof(*rs485_user))) -- 2.40.1
