RE: [PATCH] drm/amdgpu: correct gpu clock counter query on cyan skilfish

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



[AMD Official Use Only - General]

Reviewed-by: Aaron Liu <aaron.liu@xxxxxxx>

> -----Original Message-----
> From: Yu, Lang <Lang.Yu@xxxxxxx>
> Sent: Thursday, September 21, 2023 2:06 PM
> To: amd-gfx@xxxxxxxxxxxxxxxxxxxxx
> Cc: Deucher, Alexander <Alexander.Deucher@xxxxxxx>; Liu, Aaron
> <Aaron.Liu@xxxxxxx>; Zhang, Yifan <Yifan1.Zhang@xxxxxxx>;
> stable@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH] drm/amdgpu: correct gpu clock counter query on cyan
> skilfish
>
> O 09/21/ , Lang Yu wrote:
>
> Sorry for sending this patch twice. Please ignore this one.
>
> Regards,
> Lang
>
> > Cayn skilfish uses SMUIO v11.0.8 offset.
> >
> > Signed-off-by: Lang Yu <Lang.Yu@xxxxxxx>
> > Cc: <stable@xxxxxxxxxxxxxxx> # v5.15+
> > ---
> >  drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 21 +++++++++++++++++++++
> >  1 file changed, 21 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
> b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
> > index 1d671c330475..c16ca611886b 100644
> > --- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
> > +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
> > @@ -102,6 +102,11 @@
> >  #define mmGCR_GENERAL_CNTL_Sienna_Cichlid
>       0x1580
> >  #define mmGCR_GENERAL_CNTL_Sienna_Cichlid_BASE_IDX 0
> >
> > +#define mmGOLDEN_TSC_COUNT_UPPER_Cyan_Skillfish                0x0105
> > +#define mmGOLDEN_TSC_COUNT_UPPER_Cyan_Skillfish_BASE_IDX       1
> > +#define mmGOLDEN_TSC_COUNT_LOWER_Cyan_Skillfish                0x0106
> > +#define mmGOLDEN_TSC_COUNT_LOWER_Cyan_Skillfish_BASE_IDX       1
> > +
> >  #define mmGOLDEN_TSC_COUNT_UPPER_Vangogh                0x0025
> >  #define mmGOLDEN_TSC_COUNT_UPPER_Vangogh_BASE_IDX       1
> >  #define mmGOLDEN_TSC_COUNT_LOWER_Vangogh                0x0026
> > @@ -7313,6 +7318,22 @@ static uint64_t
> gfx_v10_0_get_gpu_clock_counter(struct amdgpu_device *adev)
> >     uint64_t clock, clock_lo, clock_hi, hi_check;
> >
> >     switch (adev->ip_versions[GC_HWIP][0]) {
> > +   case IP_VERSION(10, 1, 3):
> > +   case IP_VERSION(10, 1, 4):
> > +           preempt_disable();
> > +           clock_hi = RREG32_SOC15_NO_KIQ(SMUIO, 0,
> mmGOLDEN_TSC_COUNT_UPPER_Cyan_Skillfish);
> > +           clock_lo = RREG32_SOC15_NO_KIQ(SMUIO, 0,
> mmGOLDEN_TSC_COUNT_LOWER_Cyan_Skillfish);
> > +           hi_check = RREG32_SOC15_NO_KIQ(SMUIO, 0,
> mmGOLDEN_TSC_COUNT_UPPER_Cyan_Skillfish);
> > +           /* The SMUIO TSC clock frequency is 100MHz, which sets 32-bit
> carry over
> > +            * roughly every 42 seconds.
> > +            */
> > +           if (hi_check != clock_hi) {
> > +                   clock_lo = RREG32_SOC15_NO_KIQ(SMUIO, 0,
> mmGOLDEN_TSC_COUNT_LOWER_Cyan_Skillfish);
> > +                   clock_hi = hi_check;
> > +           }
> > +           preempt_enable();
> > +           clock = clock_lo | (clock_hi << 32ULL);
> > +           break;
> >     case IP_VERSION(10, 3, 1):
> >     case IP_VERSION(10, 3, 3):
> >     case IP_VERSION(10, 3, 7):
> > --
> > 2.25.1
> >




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux