[PATCH 5.4 257/367] pwm: lpc32xx: Remove handling of PWM channels

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vladimir Zapolskiy <vz@xxxxxxxxx>

[ Upstream commit 4aae44f65827f0213a7361cf9c32cfe06114473f ]

Because LPC32xx PWM controllers have only a single output which is
registered as the only PWM device/channel per controller, it is known in
advance that pwm->hwpwm value is always 0. On basis of this fact
simplify the code by removing operations with pwm->hwpwm, there is no
controls which require channel number as input.

Even though I wasn't aware at the time when I forward ported that patch,
this fixes a null pointer dereference as lpc32xx->chip.pwms is NULL
before devm_pwmchip_add() is called.

Reported-by: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
Signed-off-by: Vladimir Zapolskiy <vz@xxxxxxxxx>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
Fixes: 3d2813fb17e5 ("pwm: lpc32xx: Don't modify HW state in .probe() after the PWM chip was registered")
Signed-off-by: Thierry Reding <thierry.reding@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/pwm/pwm-lpc32xx.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/pwm/pwm-lpc32xx.c b/drivers/pwm/pwm-lpc32xx.c
index 522f862eca526..504a8f506195a 100644
--- a/drivers/pwm/pwm-lpc32xx.c
+++ b/drivers/pwm/pwm-lpc32xx.c
@@ -51,10 +51,10 @@ static int lpc32xx_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	if (duty_cycles > 255)
 		duty_cycles = 255;
 
-	val = readl(lpc32xx->base + (pwm->hwpwm << 2));
+	val = readl(lpc32xx->base);
 	val &= ~0xFFFF;
 	val |= (period_cycles << 8) | duty_cycles;
-	writel(val, lpc32xx->base + (pwm->hwpwm << 2));
+	writel(val, lpc32xx->base);
 
 	return 0;
 }
@@ -69,9 +69,9 @@ static int lpc32xx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 	if (ret)
 		return ret;
 
-	val = readl(lpc32xx->base + (pwm->hwpwm << 2));
+	val = readl(lpc32xx->base);
 	val |= PWM_ENABLE;
-	writel(val, lpc32xx->base + (pwm->hwpwm << 2));
+	writel(val, lpc32xx->base);
 
 	return 0;
 }
@@ -81,9 +81,9 @@ static void lpc32xx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 	struct lpc32xx_pwm_chip *lpc32xx = to_lpc32xx_pwm_chip(chip);
 	u32 val;
 
-	val = readl(lpc32xx->base + (pwm->hwpwm << 2));
+	val = readl(lpc32xx->base);
 	val &= ~PWM_ENABLE;
-	writel(val, lpc32xx->base + (pwm->hwpwm << 2));
+	writel(val, lpc32xx->base);
 
 	clk_disable_unprepare(lpc32xx->clk);
 }
@@ -121,9 +121,9 @@ static int lpc32xx_pwm_probe(struct platform_device *pdev)
 	lpc32xx->chip.base = -1;
 
 	/* If PWM is disabled, configure the output to the default value */
-	val = readl(lpc32xx->base + (lpc32xx->chip.pwms[0].hwpwm << 2));
+	val = readl(lpc32xx->base);
 	val &= ~PWM_PIN_LEVEL;
-	writel(val, lpc32xx->base + (lpc32xx->chip.pwms[0].hwpwm << 2));
+	writel(val, lpc32xx->base);
 
 	ret = pwmchip_add(&lpc32xx->chip);
 	if (ret < 0) {
-- 
2.40.1






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux