If system is busy during the command status polling function, the driver
may not get the chance to poll the status register till the end of time
out and return the premature status. Do a final check after time out
happens to ensure reading the correct status.
Fixes: 9d2ee0a60b8b ("mtd: nand: brcmnand: Check flash #WP pin status before nand erase/program")
Signed-off-by: William Zhang <william.zhang@xxxxxxxxxxxx>
Reviewed-by: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-3-william.zhang@xxxxxxxxxxxx
(cherry picked from commit 9cc0a598b944816f2968baf2631757f22721b996)
---
drivers/mtd/nand/brcmnand/brcmnand.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/mtd/nand/brcmnand/brcmnand.c b/drivers/mtd/nand/brcmnand/brcmnand.c
index 2ab03ac409f8..3676a38fafe9 100644
--- a/drivers/mtd/nand/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/brcmnand/brcmnand.c
@@ -836,6 +836,14 @@ static int bcmnand_ctrl_poll_status(struct brcmnand_controller *ctrl,
cpu_relax();
} while (time_after(limit, jiffies));
+ /*
+ * do a final check after time out in case the CPU was busy and the driver
+ * did not get enough time to perform the polling to avoid false alarms
+ */
+ val = brcmnand_read_reg(ctrl, BRCMNAND_INTFC_STATUS);
+ if ((val & mask) == expected_val)
+ return 0;
+
dev_warn(ctrl->dev, "timeout on status poll (expected %x got %x)\n",
expected_val, val & mask);
--
2.37.3
