5.15-stable review patch. If anyone has any objections, please let me know. ------------------ From: Xingui Yang <yangxingui@xxxxxxxxxx> [ Upstream commit 7e15334f5d256367fb4c77f4ee0003e1e3d9bf9d ] If the I/O completion response frame returned by the target device has been written to the host memory and the err bit in the status field of the received fis is 1, ts->stat should set to SAS_PROTO_RESPONSE, and this will let EH analyze and further determine cause of failure. Link: https://lore.kernel.org/r/1657823002-139010-5-git-send-email-john.garry@xxxxxxxxxx Signed-off-by: Xingui Yang <yangxingui@xxxxxxxxxx> Signed-off-by: John Garry <john.garry@xxxxxxxxxx> Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx> Stable-dep-of: f5393a5602ca ("scsi: hisi_sas: Fix normally completed I/O analysed as failed") Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c index 00f0847e1487a..7204666c04076 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c @@ -480,6 +480,9 @@ struct hisi_sas_err_record_v3 { #define RX_DATA_LEN_UNDERFLOW_OFF 6 #define RX_DATA_LEN_UNDERFLOW_MSK (1 << RX_DATA_LEN_UNDERFLOW_OFF) +#define RX_FIS_STATUS_ERR_OFF 0 +#define RX_FIS_STATUS_ERR_MSK (1 << RX_FIS_STATUS_ERR_OFF) + #define HISI_SAS_COMMAND_ENTRIES_V3_HW 4096 #define HISI_SAS_MSI_COUNT_V3_HW 32 @@ -2151,6 +2154,7 @@ slot_err_v3_hw(struct hisi_hba *hisi_hba, struct sas_task *task, hisi_sas_status_buf_addr_mem(slot); u32 dma_rx_err_type = le32_to_cpu(record->dma_rx_err_type); u32 trans_tx_fail_type = le32_to_cpu(record->trans_tx_fail_type); + u16 sipc_rx_err_type = le16_to_cpu(record->sipc_rx_err_type); u32 dw3 = le32_to_cpu(complete_hdr->dw3); switch (task->task_proto) { @@ -2178,7 +2182,10 @@ slot_err_v3_hw(struct hisi_hba *hisi_hba, struct sas_task *task, case SAS_PROTOCOL_SATA: case SAS_PROTOCOL_STP: case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: - if (dma_rx_err_type & RX_DATA_LEN_UNDERFLOW_MSK) { + if ((complete_hdr->dw0 & CMPLT_HDR_RSPNS_XFRD_MSK) && + (sipc_rx_err_type & RX_FIS_STATUS_ERR_MSK)) { + ts->stat = SAS_PROTO_RESPONSE; + } else if (dma_rx_err_type & RX_DATA_LEN_UNDERFLOW_MSK) { ts->residual = trans_tx_fail_type; ts->stat = SAS_DATA_UNDERRUN; } else if (dw3 & CMPLT_HDR_IO_IN_TARGET_MSK) { -- 2.40.1
