Patch "HID: usbhid: add always-poll quirk" has been added to the 3.14-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    HID: usbhid: add always-poll quirk

to the 3.14-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     hid-usbhid-add-always-poll-quirk.patch
and it can be found in the queue-3.14 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.


>From 0b750b3baa2d64f1b77aecc10f20deeb28efe60d Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan@xxxxxxxxxx>
Date: Fri, 5 Sep 2014 18:08:47 +0200
Subject: HID: usbhid: add always-poll quirk

From: Johan Hovold <johan@xxxxxxxxxx>

commit 0b750b3baa2d64f1b77aecc10f20deeb28efe60d upstream.

Add quirk to make sure that a device is always polled for input events
even if it hasn't been opened.

This is needed for devices that disconnects from the bus unless the
interrupt endpoint has been polled at least once or when not responding
to an input event (e.g. after having shut down X).

Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
Signed-off-by: Jiri Kosina <jkosina@xxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/hid/usbhid/hid-core.c |   26 +++++++++++++++++++++++---
 include/linux/hid.h           |    1 +
 2 files changed, 24 insertions(+), 3 deletions(-)

--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -82,7 +82,7 @@ static int hid_start_in(struct hid_devic
 	struct usbhid_device *usbhid = hid->driver_data;
 
 	spin_lock_irqsave(&usbhid->lock, flags);
-	if (hid->open > 0 &&
+	if ((hid->open > 0 || hid->quirks & HID_QUIRK_ALWAYS_POLL) &&
 			!test_bit(HID_DISCONNECTED, &usbhid->iofl) &&
 			!test_bit(HID_SUSPENDED, &usbhid->iofl) &&
 			!test_and_set_bit(HID_IN_RUNNING, &usbhid->iofl)) {
@@ -292,6 +292,8 @@ static void hid_irq_in(struct urb *urb)
 	case 0:			/* success */
 		usbhid_mark_busy(usbhid);
 		usbhid->retry_delay = 0;
+		if ((hid->quirks & HID_QUIRK_ALWAYS_POLL) && !hid->open)
+			break;
 		hid_input_report(urb->context, HID_INPUT_REPORT,
 				 urb->transfer_buffer,
 				 urb->actual_length, 1);
@@ -734,8 +736,10 @@ void usbhid_close(struct hid_device *hid
 	if (!--hid->open) {
 		spin_unlock_irq(&usbhid->lock);
 		hid_cancel_delayed_stuff(usbhid);
-		usb_kill_urb(usbhid->urbin);
-		usbhid->intf->needs_remote_wakeup = 0;
+		if (!(hid->quirks & HID_QUIRK_ALWAYS_POLL)) {
+			usb_kill_urb(usbhid->urbin);
+			usbhid->intf->needs_remote_wakeup = 0;
+		}
 	} else {
 		spin_unlock_irq(&usbhid->lock);
 	}
@@ -1119,6 +1123,19 @@ static int usbhid_start(struct hid_devic
 
 	set_bit(HID_STARTED, &usbhid->iofl);
 
+	if (hid->quirks & HID_QUIRK_ALWAYS_POLL) {
+		ret = usb_autopm_get_interface(usbhid->intf);
+		if (ret)
+			goto fail;
+		usbhid->intf->needs_remote_wakeup = 1;
+		ret = hid_start_in(hid);
+		if (ret) {
+			dev_err(&hid->dev,
+				"failed to start in urb: %d\n", ret);
+		}
+		usb_autopm_put_interface(usbhid->intf);
+	}
+
 	/* Some keyboards don't work until their LEDs have been set.
 	 * Since BIOSes do set the LEDs, it must be safe for any device
 	 * that supports the keyboard boot protocol.
@@ -1151,6 +1168,9 @@ static void usbhid_stop(struct hid_devic
 	if (WARN_ON(!usbhid))
 		return;
 
+	if (hid->quirks & HID_QUIRK_ALWAYS_POLL)
+		usbhid->intf->needs_remote_wakeup = 0;
+
 	clear_bit(HID_STARTED, &usbhid->iofl);
 	spin_lock_irq(&usbhid->lock);	/* Sync with error and led handlers */
 	set_bit(HID_DISCONNECTED, &usbhid->iofl);
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -286,6 +286,7 @@ struct hid_item {
 #define HID_QUIRK_HIDINPUT_FORCE		0x00000080
 #define HID_QUIRK_NO_EMPTY_INPUT		0x00000100
 #define HID_QUIRK_NO_INIT_INPUT_REPORTS		0x00000200
+#define HID_QUIRK_ALWAYS_POLL			0x00000400
 #define HID_QUIRK_SKIP_OUTPUT_REPORTS		0x00010000
 #define HID_QUIRK_FULLSPEED_INTERVAL		0x10000000
 #define HID_QUIRK_NO_INIT_REPORTS		0x20000000


Patches currently in stable-queue which might be from johan@xxxxxxxxxx are

queue-3.14/usb-option-add-haier-ce81b-cdma-modem.patch
queue-3.14/hid-usbhid-add-always-poll-quirk.patch
queue-3.14/usb-cdc-acm-add-device-id-for-gw-instek-afg-2225.patch
queue-3.14/hid-usbhid-enable-always-poll-quirk-for-elan-touchscreen.patch
queue-3.14/usb-option-add-support-for-telit-le910.patch
queue-3.14/usb-core-add-device-qualifier-quirk.patch
queue-3.14/usb-quirks-enable-device-qualifier-quirk-for-elan-touchscreen.patch
queue-3.14/usb-serial-ftdi_sio-add-awinda-station-and-dongle-products.patch
queue-3.14/usb-serial-cp210x-add-silicon-labs-358x-vid-and-pid.patch
queue-3.14/usb-cdc-acm-only-raise-dtr-on-transitions-from-b0.patch
queue-3.14/usb-serial-ftdi_sio-add-bricked-ftdi-device-pid.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]