[PATCH 6.5 180/285] clocksource/drivers/arm_arch_timer: Disable timer before programming CVAL

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



6.5-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Walter Chang <walter.chang@xxxxxxxxxxxx>

commit e7d65e40ab5a5940785c5922f317602d0268caaf upstream.

Due to the fact that the use of `writeq_relaxed()` to program CVAL is
not guaranteed to be atomic, it is necessary to disable the timer before
programming CVAL.

However, if the MMIO timer is already enabled and has not yet expired,
there is a possibility of unexpected behavior occurring: when the CPU
enters the idle state during this period, and if the CPU's local event
is earlier than the broadcast event, the following process occurs:

tick_broadcast_enter()
  tick_broadcast_oneshot_control(TICK_BROADCAST_ENTER)
    __tick_broadcast_oneshot_control()
      ___tick_broadcast_oneshot_control()
        tick_broadcast_set_event()
          clockevents_program_event()
            set_next_event_mem()

During this process, the MMIO timer remains enabled while programming
CVAL. To prevent such behavior, disable timer explicitly prior to
programming CVAL.

Fixes: 8b82c4f883a7 ("clocksource/drivers/arm_arch_timer: Move MMIO timer programming over to CVAL")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Walter Chang <walter.chang@xxxxxxxxxxxx>
Acked-by: Marc Zyngier <maz@xxxxxxxxxx>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
Signed-off-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20230717090735.19370-1-walter.chang@xxxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/clocksource/arm_arch_timer.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -792,6 +792,13 @@ static __always_inline void set_next_eve
 	u64 cnt;
 
 	ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL, clk);
+
+	/* Timer must be disabled before programming CVAL */
+	if (ctrl & ARCH_TIMER_CTRL_ENABLE) {
+		ctrl &= ~ARCH_TIMER_CTRL_ENABLE;
+		arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl, clk);
+	}
+
 	ctrl |= ARCH_TIMER_CTRL_ENABLE;
 	ctrl &= ~ARCH_TIMER_CTRL_IT_MASK;
 





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux