[PATCH 6.5 009/285] scsi: qla2xxx: Fix erroneous link up failure

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



6.5-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Quinn Tran <qutran@xxxxxxxxxxx>

commit 5b51f35d127e7bef55fa869d2465e2bca4636454 upstream.

Link up failure occurred where driver failed to see certain events from FW
indicating link up (AEN 8011) and fabric login completion (AEN 8014).
Without these 2 events, driver would not proceed forward to scan the
fabric. The cause of this is due to delay in the receive of interrupt for
Mailbox 60 that causes qla to set the fw_started flag late.  The late
setting of this flag causes other interrupts to be dropped.  These dropped
interrupts happen to be the link up (AEN 8011) and fabric login completion
(AEN 8014).

Set fw_started flag early to prevent interrupts being dropped.

Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Quinn Tran <qutran@xxxxxxxxxxx>
Signed-off-by: Nilesh Javali <njavali@xxxxxxxxxxx>
Link: https://lore.kernel.org/r/20230714070104.40052-6-njavali@xxxxxxxxxxx
Reviewed-by: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/scsi/qla2xxx/qla_init.c |    3 ++-
 drivers/scsi/qla2xxx/qla_isr.c  |    6 +++++-
 2 files changed, 7 insertions(+), 2 deletions(-)

--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -4815,15 +4815,16 @@ qla2x00_init_rings(scsi_qla_host_t *vha)
 	if (ha->flags.edif_enabled)
 		mid_init_cb->init_cb.frame_payload_size = cpu_to_le16(ELS_MAX_PAYLOAD);
 
+	QLA_FW_STARTED(ha);
 	rval = qla2x00_init_firmware(vha, ha->init_cb_size);
 next_check:
 	if (rval) {
+		QLA_FW_STOPPED(ha);
 		ql_log(ql_log_fatal, vha, 0x00d2,
 		    "Init Firmware **** FAILED ****.\n");
 	} else {
 		ql_dbg(ql_dbg_init, vha, 0x00d3,
 		    "Init Firmware -- success.\n");
-		QLA_FW_STARTED(ha);
 		vha->u_ql2xexchoffld = vha->u_ql2xiniexchg = 0;
 	}
 
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1121,8 +1121,12 @@ qla2x00_async_event(scsi_qla_host_t *vha
 	unsigned long	flags;
 	fc_port_t	*fcport = NULL;
 
-	if (!vha->hw->flags.fw_started)
+	if (!vha->hw->flags.fw_started) {
+		ql_log(ql_log_warn, vha, 0x50ff,
+		    "Dropping AEN - %04x %04x %04x %04x.\n",
+		    mb[0], mb[1], mb[2], mb[3]);
 		return;
+	}
 
 	/* Setup to process RIO completion. */
 	handle_cnt = 0;





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux