Re: [PATCH v2] drm/amdgpu: always use legacy tlb flush on cyan_skilfish

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am 15.09.23 um 10:53 schrieb Lang Yu:
On 09/14/ , Felix Kuehling wrote:
On 2023-09-14 10:02, Christian König wrote:
Do we still need to use legacy flush to emulate heavyweight flush
if we don't use SVM? And can I push this now?

Felix needs to decide that. From what I understand the KFD needs heavyweight flushes for secure SVM operation.

If heavyweight flushes are buggy papering over that by using legacy flushes is only a mediocre workaround.

Regards,
Christian.


Regards,
Lang


Am 14.09.23 um 15:59 schrieb Felix Kuehling:
On 2023-09-14 9:39, Christian König wrote:
Is a single legacy flush sufficient to emulate an heavyweight
flush as well?

On previous generations we needed to issue at least two legacy
flushes for this.
I assume you are referring to the Vega20 XGMI workaround. That is a
very different issue. Because PTEs would be cached in L2, we had to
always use a heavy-weight flush that would also flush the L2 cache
as well, and follow that with another legacy flush to deal with race
conditions where stale PTEs could be re-fetched from L2 before the
L2 flush was complete.
No, we also have another (badly documented) workaround which issues a
legacy flush before each heavy weight on some hw generations. See the my
TLB flush cleanup patches.

A heavy-weight flush guarantees that there are no more possible
memory accesses using the old PTEs. With physically addressed caches
on GFXv9 that includes a cache flush because the address translation
happened before putting data into the cache. I think the address
translation and cache architecture works differently on GFXv10. So
maybe the cache-flush is not required here.

But even then a legacy flush probably allows for in-flight memory
accesses with old physical addresses to complete after the TLB
flush. So there is a small risk of memory corruption that was
assumed to not be accessed by the GPU any more. Or when using IOMMU
device isolation it would result in IOMMU faults if the DMA mappings
are invalidated slightly too early.
Mhm, that's quite bad. Any idea how to avoid that?
A few ideas

  * Add an arbitrary delay and hope that it is longer than the FIFOs in
    the HW
  * Execute an atomic operation to memory on some GPU engine that could
    act as a fence, maybe just a RELEASE_MEM on the CP to some writeback
    location would do the job
  * If needed, RELEASE_MEM could also perform a cache flush

Regards,
   Felix


Regards,
Christian.

Regards,
   Felix


And please don't push before getting an rb from Felix as well.

Regards,
Christian.


Am 14.09.23 um 11:23 schrieb Lang Yu:
cyan_skilfish has problems with other flush types.

v2: fix incorrect ternary conditional operator usage.(Yifan)

Signed-off-by: Lang Yu <Lang.Yu@xxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx> # v5.15+
---
   drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c | 7 ++++++-
   1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c
b/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c
index d3da13f4c80e..c6d11047169a 100644
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c
@@ -236,7 +236,8 @@ static void
gmc_v10_0_flush_vm_hub(struct amdgpu_device *adev, uint32_t
vmid,
   {
       bool use_semaphore =
gmc_v10_0_use_invalidate_semaphore(adev, vmhub);
       struct amdgpu_vmhub *hub = &adev->vmhub[vmhub];
-    u32 inv_req =
hub->vmhub_funcs->get_invalidate_req(vmid, flush_type);
+    u32 inv_req = hub->vmhub_funcs->get_invalidate_req(vmid,
+              (adev->asic_type != CHIP_CYAN_SKILLFISH) ?
flush_type : 0);
       u32 tmp;
       /* Use register 17 for GART */
       const unsigned int eng = 17;
@@ -331,6 +332,8 @@ static void
gmc_v10_0_flush_gpu_tlb(struct amdgpu_device *adev, uint32_t
vmid,
         int r;
   +    flush_type = (adev->asic_type != CHIP_CYAN_SKILLFISH)
? flush_type : 0;
+
       /* flush hdp cache */
       adev->hdp.funcs->flush_hdp(adev, NULL);
   @@ -426,6 +429,8 @@ static int
gmc_v10_0_flush_gpu_tlb_pasid(struct amdgpu_device *adev,
       struct amdgpu_ring *ring = &adev->gfx.kiq[0].ring;
       struct amdgpu_kiq *kiq = &adev->gfx.kiq[0];
   +    flush_type = (adev->asic_type != CHIP_CYAN_SKILLFISH)
? flush_type : 0;
+
       if (amdgpu_emu_mode == 0 && ring->sched.ready) {
           spin_lock(&adev->gfx.kiq[0].ring_lock);
           /* 2 dwords flush + 8 dwords fence */




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux