6.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rany Hany <rany_hany@xxxxxxxxxx>
[ Upstream commit c4f0755823045b66484fb53d686f85d3151400f4 ]
Due to AP stop improperly, mt7915 driver would face random command timeout
by chip fw problem. Migrate AP start/stop process to .start_ap/.stop_ap and
congiure BSS network settings in both hooks.
The new flow is shown below.
* AP start
.start_ap()
configure BSS network resource
set BSS to connected state
.bss_info_changed()
enable fw beacon offload
* AP stop
.bss_info_changed()
disable fw beacon offload (skip this command)
.stop_ap()
set BSS to disconnected state (beacon offload disabled automatically)
destroy BSS network resource
Based on "mt76: mt7921: fix command timeout in AP stop period"
Signed-off-by: Rany Hany <rany_hany@xxxxxxxxxx>
Signed-off-by: Felix Fietkau <nbd@xxxxxxxx>
Stable-dep-of: 02a894046d5a ("wifi: mt76: mt7915: fix capabilities in non-AP mode")
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
.../net/wireless/mediatek/mt76/mt7915/main.c | 63 +++++++++++++++----
1 file changed, 50 insertions(+), 13 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/main.c b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
index 2da57357c4174..13d429bd44e28 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
@@ -599,6 +599,7 @@ static void mt7915_bss_info_changed(struct ieee80211_hw *hw,
{
struct mt7915_phy *phy = mt7915_hw_phy(hw);
struct mt7915_dev *dev = mt7915_hw_dev(hw);
+ int set_bss_info = -1, set_sta = -1;
mutex_lock(&dev->mt76.mutex);
@@ -607,15 +608,18 @@ static void mt7915_bss_info_changed(struct ieee80211_hw *hw,
* and then peer references bss_info_rfch to set bandwidth cap.
*/
if (changed & BSS_CHANGED_BSSID &&
- vif->type == NL80211_IFTYPE_STATION) {
- bool join = !is_zero_ether_addr(info->bssid);
-
- mt7915_mcu_add_bss_info(phy, vif, join);
- mt7915_mcu_add_sta(dev, vif, NULL, join);
- }
-
+ vif->type == NL80211_IFTYPE_STATION)
+ set_bss_info = set_sta = !is_zero_ether_addr(info->bssid);
if (changed & BSS_CHANGED_ASSOC)
- mt7915_mcu_add_bss_info(phy, vif, vif->cfg.assoc);
+ set_bss_info = vif->cfg.assoc;
+ if (changed & BSS_CHANGED_BEACON_ENABLED &&
+ vif->type != NL80211_IFTYPE_AP)
+ set_bss_info = set_sta = info->enable_beacon;
+
+ if (set_bss_info == 1)
+ mt7915_mcu_add_bss_info(phy, vif, true);
+ if (set_sta == 1)
+ mt7915_mcu_add_sta(dev, vif, NULL, true);
if (changed & BSS_CHANGED_ERP_CTS_PROT)
mt7915_mac_enable_rtscts(dev, vif, info->use_cts_prot);
@@ -629,11 +633,6 @@ static void mt7915_bss_info_changed(struct ieee80211_hw *hw,
}
}
- if (changed & BSS_CHANGED_BEACON_ENABLED && info->enable_beacon) {
- mt7915_mcu_add_bss_info(phy, vif, true);
- mt7915_mcu_add_sta(dev, vif, NULL, true);
- }
-
/* ensure that enable txcmd_mode after bss_info */
if (changed & (BSS_CHANGED_QOS | BSS_CHANGED_BEACON_ENABLED))
mt7915_mcu_set_tx(dev, vif);
@@ -650,6 +649,42 @@ static void mt7915_bss_info_changed(struct ieee80211_hw *hw,
BSS_CHANGED_FILS_DISCOVERY))
mt7915_mcu_add_beacon(hw, vif, info->enable_beacon, changed);
+ if (set_bss_info == 0)
+ mt7915_mcu_add_bss_info(phy, vif, false);
+ if (set_sta == 0)
+ mt7915_mcu_add_sta(dev, vif, NULL, false);
+
+ mutex_unlock(&dev->mt76.mutex);
+}
+
+static int
+mt7915_start_ap(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *link_conf)
+{
+ struct mt7915_phy *phy = mt7915_hw_phy(hw);
+ struct mt7915_dev *dev = mt7915_hw_dev(hw);
+ int err;
+
+ mutex_lock(&dev->mt76.mutex);
+
+ err = mt7915_mcu_add_bss_info(phy, vif, true);
+ if (err)
+ goto out;
+ err = mt7915_mcu_add_sta(dev, vif, NULL, true);
+out:
+ mutex_unlock(&dev->mt76.mutex);
+
+ return err;
+}
+
+static void
+mt7915_stop_ap(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *link_conf)
+{
+ struct mt7915_dev *dev = mt7915_hw_dev(hw);
+
+ mutex_lock(&dev->mt76.mutex);
+ mt7915_mcu_add_sta(dev, vif, NULL, false);
mutex_unlock(&dev->mt76.mutex);
}
@@ -1528,6 +1563,8 @@ const struct ieee80211_ops mt7915_ops = {
.conf_tx = mt7915_conf_tx,
.configure_filter = mt7915_configure_filter,
.bss_info_changed = mt7915_bss_info_changed,
+ .start_ap = mt7915_start_ap,
+ .stop_ap = mt7915_stop_ap,
.sta_add = mt7915_sta_add,
.sta_remove = mt7915_sta_remove,
.sta_pre_rcu_remove = mt76_sta_pre_rcu_remove,
--
2.40.1
