6.4-stable review patch. If anyone has any objections, please let me know. ------------------ From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> [ Upstream commit 40b398beabdfe0e9088b13976e56b1dc706fe851 ] Sony ever so graciously provides GPIO line names in their downstream kernel (though sometimes they are not 100% accurate and you can judge that by simply looking at them and with what drivers they are used). Add these to the PDX203&206 DTSIs to better document the hardware. Diff between 203 and 206: < "CAM_PWR_A_CS", > "FRONTC_PWR_EN", < "CAM4_MCLK", < "TOF_RST_N", > "NC", > "NC", < "WLC_I2C_SDA", < "WLC_I2C_SCL", /* GPIO_120 */ > "NC", > "NC", < "WLC_INT_N", > "NC", Which makes sense, as 203 has a 3D iToF, slightly different camera power wiring and WLC (WireLess Charging). Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> Link: https://lore.kernel.org/r/20230614-topic-edo_pinsgpiopmic-v2-1-6f90bba54c53@xxxxxxxxxx Signed-off-by: Bjorn Andersson <andersson@xxxxxxxxxx> Stable-dep-of: a422c6a91a66 ("arm64: dts: qcom: sm8250-edo: Rectify gpio-keys") Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- .../qcom/sm8250-sony-xperia-edo-pdx203.dts | 183 ++++++++++++++++++ .../qcom/sm8250-sony-xperia-edo-pdx206.dts | 183 ++++++++++++++++++ 2 files changed, 366 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts index 356a81698731a..84104d2b20101 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts @@ -14,3 +14,186 @@ / { }; /delete-node/ &vreg_l7f_1p8; + +&tlmm { + gpio-line-names = "AP_CTI_IN", /* GPIO_0 */ + "MDM2AP_ERR_FATAL", + "AP_CTI_OUT", + "MDM2AP_STATUS", + "NFC_I2C_SDA", + "NFC_I2C_SCL", + "NFC_EN", + "NFC_CLK_REQ", + "NFC_ESE_PWR_REQ", + "DVDT_WRT_DET_AND", + "SPK_AMP_RESET_N", /* GPIO_10 */ + "SPK_AMP_INT_N", + "APPS_I2C_1_SDA", + "APPS_I2C_1_SCL", + "NC", + "TX_GTR_THRES_IN", + "HST_BT_UART_CTS", + "HST_BT_UART_RFR", + "HST_BT_UART_TX", + "HST_BT_UART_RX", + "HST_WLAN_EN", /* GPIO_20 */ + "HST_BT_EN", + "RGBC_IR_PWR_EN", + "FP_INT_N", + "NC", + "NC", + "NC", + "NC", + "NFC_ESE_SPI_MISO", + "NFC_ESE_SPI_MOSI", + "NFC_ESE_SPI_SCLK", /* GPIO_30 */ + "NFC_ESE_SPI_CS_N", + "WCD_RST_N", + "NC", + "SDM_DEBUG_UART_TX", + "SDM_DEBUG_UART_RX", + "TS_I2C_SDA", + "TS_I2C_SCL", + "TS_INT_N", + "FP_SPI_MISO", /* GPIO_40 */ + "FP_SPI_MOSI", + "FP_SPI_SCLK", + "FP_SPI_CS_N", + "APPS_I2C_0_SDA", + "APPS_I2C_0_SCL", + "DISP_ERR_FG", + "UIM2_DETECT_EN", + "NC", + "NC", + "NC", /* GPIO_50 */ + "NC", + "MDM_UART_CTS", + "MDM_UART_RFR", + "MDM_UART_TX", + "MDM_UART_RX", + "AP2MDM_STATUS", + "AP2MDM_ERR_FATAL", + "MDM_IPC_HS_UART_TX", + "MDM_IPC_HS_UART_RX", + "NC", /* GPIO_60 */ + "NC", + "NC", + "NC", + "NC", + "USB_CC_DIR", + "DISP_VSYNC", + "NC", + "NC", + "CAM_PWR_B_CS", + "NC", /* GPIO_70 */ + "CAM_PWR_A_CS", + "SBU_SW_SEL", + "SBU_SW_OE", + "FP_RESET_N", + "FP_RESET_N", + "DISP_RESET_N", + "DEBUG_GPIO0", + "TRAY_DET", + "CAM2_RST_N", + "PCIE0_RST_N", + "PCIE0_CLK_REQ_N", /* GPIO_80 */ + "PCIE0_WAKE_N", + "DVDT_ENABLE", + "DVDT_WRT_DET_OR", + "NC", + "PCIE2_RST_N", + "PCIE2_CLK_REQ_N", + "PCIE2_WAKE_N", + "MDM_VFR_IRQ0", + "MDM_VFR_IRQ1", + "SW_SERVICE", /* GPIO_90 */ + "CAM_SOF", + "CAM1_RST_N", + "CAM0_RST_N", + "CAM0_MCLK", + "CAM1_MCLK", + "CAM2_MCLK", + "CAM3_MCLK", + "CAM4_MCLK", + "TOF_RST_N", + "NC", /* GPIO_100 */ + "CCI0_I2C_SDA", + "CCI0_I2C_SCL", + "CCI1_I2C_SDA", + "CCI1_I2C_SCL_", + "CCI2_I2C_SDA", + "CCI2_I2C_SCL", + "CCI3_I2C_SDA", + "CCI3_I2C_SCL", + "CAM3_RST_N", + "NFC_DWL_REQ", /* GPIO_110 */ + "NFC_IRQ", + "XVS", + "NC", + "RF_ID_EXTENSION", + "SPK_AMP_I2C_SDA", + "SPK_AMP_I2C_SCL", + "NC", + "NC", + "WLC_I2C_SDA", + "WLC_I2C_SCL", /* GPIO_120 */ + "ACC_COVER_OPEN", + "ALS_PROX_INT_N", + "ACCEL_INT", + "WLAN_SW_CTRL", + "CAMSENSOR_I2C_SDA", + "CAMSENSOR_I2C_SCL", + "UDON_SWITCH_SEL", + "WDOG_DISABLE", + "BAROMETER_INT", + "NC", /* GPIO_130 */ + "NC", + "FORCED_USB_BOOT", + "NC", + "NC", + "WLC_INT_N", + "NC", + "NC", + "RGBC_IR_INT", + "NC", + "NC", /* GPIO_140 */ + "NC", + "BT_SLIMBUS_CLK", + "BT_SLIMBUS_DATA", + "HW_ID_0", + "HW_ID_1", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", /* GPIO_150 */ + "WCD_SWR_RX_DATA1", + "SDM_DMIC_CLK1", + "SDM_DMIC_DATA1", + "SDM_DMIC_CLK2", + "SDM_DMIC_DATA2", + "SPK_AMP_I2S_CLK", + "SPK_AMP_I2S_WS", + "SPK_AMP_I2S_ASP_DIN", + "SPK_AMP_I2S_ASP_DOUT", + "COMPASS_I2C_SDA", /* GPIO_160 */ + "COMPASS_I2C_SCL", + "NC", + "NC", + "SSC_SPI_1_MISO", + "SSC_SPI_1_MOSI", + "SSC_SPI_1_CLK", + "SSC_SPI_1_CS_N", + "NC", + "NC", + "SSC_SENSOR_I2C_SDA", /* GPIO_170 */ + "SSC_SENSOR_I2C_SCL", + "NC", + "NC", + "NC", + "NC", + "HST_BLE_SNS_UART6_TX", + "HST_BLE_SNS_UART6_RX", + "HST_WLAN_UART_TX", + "HST_WLAN_UART_RX"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts index 01fe3974ee720..fae6568cb79e4 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts @@ -30,6 +30,189 @@ g-assist-key { }; }; +&tlmm { + gpio-line-names = "AP_CTI_IN", /* GPIO_0 */ + "MDM2AP_ERR_FATAL", + "AP_CTI_OUT", + "MDM2AP_STATUS", + "NFC_I2C_SDA", + "NFC_I2C_SCL", + "NFC_EN", + "NFC_CLK_REQ", + "NFC_ESE_PWR_REQ", + "DVDT_WRT_DET_AND", + "SPK_AMP_RESET_N", /* GPIO_10 */ + "SPK_AMP_INT_N", + "APPS_I2C_1_SDA", + "APPS_I2C_1_SCL", + "NC", + "TX_GTR_THRES_IN", + "HST_BT_UART_CTS", + "HST_BT_UART_RFR", + "HST_BT_UART_TX", + "HST_BT_UART_RX", + "HST_WLAN_EN", /* GPIO_20 */ + "HST_BT_EN", + "RGBC_IR_PWR_EN", + "FP_INT_N", + "NC", + "NC", + "NC", + "NC", + "NFC_ESE_SPI_MISO", + "NFC_ESE_SPI_MOSI", + "NFC_ESE_SPI_SCLK", /* GPIO_30 */ + "NFC_ESE_SPI_CS_N", + "WCD_RST_N", + "NC", + "SDM_DEBUG_UART_TX", + "SDM_DEBUG_UART_RX", + "TS_I2C_SDA", + "TS_I2C_SCL", + "TS_INT_N", + "FP_SPI_MISO", /* GPIO_40 */ + "FP_SPI_MOSI", + "FP_SPI_SCLK", + "FP_SPI_CS_N", + "APPS_I2C_0_SDA", + "APPS_I2C_0_SCL", + "DISP_ERR_FG", + "UIM2_DETECT_EN", + "NC", + "NC", + "NC", /* GPIO_50 */ + "NC", + "MDM_UART_CTS", + "MDM_UART_RFR", + "MDM_UART_TX", + "MDM_UART_RX", + "AP2MDM_STATUS", + "AP2MDM_ERR_FATAL", + "MDM_IPC_HS_UART_TX", + "MDM_IPC_HS_UART_RX", + "NC", /* GPIO_60 */ + "NC", + "NC", + "NC", + "NC", + "USB_CC_DIR", + "DISP_VSYNC", + "NC", + "NC", + "CAM_PWR_B_CS", + "NC", /* GPIO_70 */ + "FRONTC_PWR_EN", + "SBU_SW_SEL", + "SBU_SW_OE", + "FP_RESET_N", + "FP_RESET_N", + "DISP_RESET_N", + "DEBUG_GPIO0", + "TRAY_DET", + "CAM2_RST_N", + "PCIE0_RST_N", + "PCIE0_CLK_REQ_N", /* GPIO_80 */ + "PCIE0_WAKE_N", + "DVDT_ENABLE", + "DVDT_WRT_DET_OR", + "NC", + "PCIE2_RST_N", + "PCIE2_CLK_REQ_N", + "PCIE2_WAKE_N", + "MDM_VFR_IRQ0", + "MDM_VFR_IRQ1", + "SW_SERVICE", /* GPIO_90 */ + "CAM_SOF", + "CAM1_RST_N", + "CAM0_RST_N", + "CAM0_MCLK", + "CAM1_MCLK", + "CAM2_MCLK", + "CAM3_MCLK", + "NC", + "NC", + "NC", /* GPIO_100 */ + "CCI0_I2C_SDA", + "CCI0_I2C_SCL", + "CCI1_I2C_SDA", + "CCI1_I2C_SCL_", + "CCI2_I2C_SDA", + "CCI2_I2C_SCL", + "CCI3_I2C_SDA", + "CCI3_I2C_SCL", + "CAM3_RST_N", + "NFC_DWL_REQ", /* GPIO_110 */ + "NFC_IRQ", + "XVS", + "NC", + "RF_ID_EXTENSION", + "SPK_AMP_I2C_SDA", + "SPK_AMP_I2C_SCL", + "NC", + "NC", + "NC", + "NC", + "ACC_COVER_OPEN", + "ALS_PROX_INT_N", + "ACCEL_INT", + "WLAN_SW_CTRL", + "CAMSENSOR_I2C_SDA", + "CAMSENSOR_I2C_SCL", + "UDON_SWITCH_SEL", + "WDOG_DISABLE", + "BAROMETER_INT", + "NC", /* GPIO_130 */ + "NC", + "FORCED_USB_BOOT", + "NC", + "NC", + "NC", + "NC", + "NC", + "RGBC_IR_INT", + "NC", + "NC", /* GPIO_140 */ + "NC", + "BT_SLIMBUS_CLK", + "BT_SLIMBUS_DATA", + "HW_ID_0", + "HW_ID_1", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", /* GPIO_150 */ + "WCD_SWR_RX_DATA1", + "SDM_DMIC_CLK1", + "SDM_DMIC_DATA1", + "SDM_DMIC_CLK2", + "SDM_DMIC_DATA2", + "SPK_AMP_I2S_CLK", + "SPK_AMP_I2S_WS", + "SPK_AMP_I2S_ASP_DIN", + "SPK_AMP_I2S_ASP_DOUT", + "COMPASS_I2C_SDA", /* GPIO_160 */ + "COMPASS_I2C_SCL", + "NC", + "NC", + "SSC_SPI_1_MISO", + "SSC_SPI_1_MOSI", + "SSC_SPI_1_CLK", + "SSC_SPI_1_CS_N", + "NC", + "NC", + "SSC_SENSOR_I2C_SDA", /* GPIO_170 */ + "SSC_SENSOR_I2C_SCL", + "NC", + "NC", + "NC", + "NC", + "HST_BLE_SNS_UART6_TX", + "HST_BLE_SNS_UART6_RX", + "HST_WLAN_UART_TX", + "HST_WLAN_UART_RX"; +}; + &vreg_l2f_1p3 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; -- 2.40.1
