6.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede <hdegoede@xxxxxxxxxx>
[ Upstream commit 50a7bad4e0a37d7018ab6fe843dd84bc6b2ecf72 ]
The index into ov2680_hv_flip_bayer_order[] should be 0-3, but
ov2680_bayer_order() was using 0 + BIT(2) + (BIT(2) << 1) as
max index, while the intention was to use: 0 + 1 + 2 as max index.
Fix the index calculation in ov2680_bayer_order(), while at it
also just use the ctrl values rather then reading them back using
a slow i2c-read transaction.
This also allows making the function void, since there now are
no more i2c-reads to error check.
Note the check for the ctrls being NULL is there to allow
adding an ov2680_fill_format() helper later, which will call
ov2680_set_bayer_order() during probe() before the ctrls are created.
[Sakari Ailus: Change all users of ov2680_set_bayer_order() here]
Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver")
Reviewed-by: Daniel Scally <dan.scally@xxxxxxxxxxxxxxxx>
Acked-by: Rui Miguel Silva <rmfrfs@xxxxxxxxx>
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/media/i2c/ov2680.c | 33 ++++++++++++++-------------------
1 file changed, 14 insertions(+), 19 deletions(-)
diff --git a/drivers/media/i2c/ov2680.c b/drivers/media/i2c/ov2680.c
index 049ca28b96631..38c8b95f36523 100644
--- a/drivers/media/i2c/ov2680.c
+++ b/drivers/media/i2c/ov2680.c
@@ -315,26 +315,17 @@ static void ov2680_power_down(struct ov2680_dev *sensor)
usleep_range(5000, 10000);
}
-static int ov2680_bayer_order(struct ov2680_dev *sensor)
+static void ov2680_set_bayer_order(struct ov2680_dev *sensor)
{
- u32 format1;
- u32 format2;
- u32 hv_flip;
- int ret;
-
- ret = ov2680_read_reg(sensor, OV2680_REG_FORMAT1, &format1);
- if (ret < 0)
- return ret;
+ int hv_flip = 0;
- ret = ov2680_read_reg(sensor, OV2680_REG_FORMAT2, &format2);
- if (ret < 0)
- return ret;
+ if (sensor->ctrls.vflip && sensor->ctrls.vflip->val)
+ hv_flip += 1;
- hv_flip = (format2 & BIT(2) << 1) | (format1 & BIT(2));
+ if (sensor->ctrls.hflip && sensor->ctrls.hflip->val)
+ hv_flip += 2;
sensor->fmt.code = ov2680_hv_flip_bayer_order[hv_flip];
-
- return 0;
}
static int ov2680_vflip_enable(struct ov2680_dev *sensor)
@@ -345,7 +336,8 @@ static int ov2680_vflip_enable(struct ov2680_dev *sensor)
if (ret < 0)
return ret;
- return ov2680_bayer_order(sensor);
+ ov2680_set_bayer_order(sensor);
+ return 0;
}
static int ov2680_vflip_disable(struct ov2680_dev *sensor)
@@ -356,7 +348,8 @@ static int ov2680_vflip_disable(struct ov2680_dev *sensor)
if (ret < 0)
return ret;
- return ov2680_bayer_order(sensor);
+ ov2680_set_bayer_order(sensor);
+ return 0;
}
static int ov2680_hflip_enable(struct ov2680_dev *sensor)
@@ -367,7 +360,8 @@ static int ov2680_hflip_enable(struct ov2680_dev *sensor)
if (ret < 0)
return ret;
- return ov2680_bayer_order(sensor);
+ ov2680_set_bayer_order(sensor);
+ return 0;
}
static int ov2680_hflip_disable(struct ov2680_dev *sensor)
@@ -378,7 +372,8 @@ static int ov2680_hflip_disable(struct ov2680_dev *sensor)
if (ret < 0)
return ret;
- return ov2680_bayer_order(sensor);
+ ov2680_set_bayer_order(sensor);
+ return 0;
}
static int ov2680_test_pattern_set(struct ov2680_dev *sensor, int value)
--
2.40.1
