6.4-stable review patch. If anyone has any objections, please let me know. ------------------ From: Jonas Karlman <jonas@xxxxxxxxx> [ Upstream commit a87852e37f782257ebc57cc44a0d3fbf806471f6 ] Despite its name, the regulator vcc3v3_pcie30x1 has nothing to do with pcie30x1. Instead, it supply power to VBAT1-5 on the M.2 KEY B port as seen on page 8 of the schematic [1]. pcie30x1 is used for the mini PCIe slot, and as seen on page 9 the vcc3v3_minipcie regulator is instead related to pcie30x1. The M.2 KEY B port can be used for WWAN USB2 modules or SATA drives. Use correct regulator vcc3v3_minipcie for pcie30x1. [1] https://dl.radxa.com/cm3p/e25/radxa-e25-v1.4-sch.pdf Fixes: 2bf2f4d9f673 ("arm64: dts: rockchip: Add Radxa CM3I E25") Signed-off-by: Jonas Karlman <jonas@xxxxxxxxx> Link: https://lore.kernel.org/r/20230724145213.3833099-1-jonas@xxxxxxxxx Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- .../arm64/boot/dts/rockchip/rk3568-radxa-e25.dts | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts index 63c4bd873188e..f0e4884438e39 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts @@ -47,6 +47,9 @@ vbus_typec: vbus-typec-regulator { vin-supply = <&vcc5v0_sys>; }; + /* actually fed by vcc5v0_sys, dependent + * on pi6c clock generator + */ vcc3v3_minipcie: vcc3v3-minipcie-regulator { compatible = "regulator-fixed"; enable-active-high; @@ -54,9 +57,9 @@ vcc3v3_minipcie: vcc3v3-minipcie-regulator { pinctrl-names = "default"; pinctrl-0 = <&minipcie_enable_h>; regulator-name = "vcc3v3_minipcie"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v0_sys>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_pi6c_05>; }; vcc3v3_ngff: vcc3v3-ngff-regulator { @@ -71,9 +74,6 @@ vcc3v3_ngff: vcc3v3-ngff-regulator { vin-supply = <&vcc5v0_sys>; }; - /* actually fed by vcc5v0_sys, dependent - * on pi6c clock generator - */ vcc3v3_pcie30x1: vcc3v3-pcie30x1-regulator { compatible = "regulator-fixed"; enable-active-high; @@ -83,7 +83,7 @@ vcc3v3_pcie30x1: vcc3v3-pcie30x1-regulator { regulator-name = "vcc3v3_pcie30x1"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - vin-supply = <&vcc3v3_pi6c_05>; + vin-supply = <&vcc5v0_sys>; }; vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator { @@ -117,7 +117,7 @@ &pcie3x1 { pinctrl-names = "default"; pinctrl-0 = <&pcie30x1m0_pins>; reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_pcie30x1>; + vpcie3v3-supply = <&vcc3v3_minipcie>; status = "okay"; }; -- 2.40.1
