This is a note to let you know that I've just added the patch titled
libata-sff: Fix controllers with no ctl port
to the 3.10-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
libata-sff-fix-controllers-with-no-ctl-port.patch
and it can be found in the queue-3.10 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 6d8ca28fa688a9354bc9fbc935bdaeb3651b6677 Mon Sep 17 00:00:00 2001
From: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
Date: Sat, 27 Sep 2014 00:04:46 +0200
Subject: libata-sff: Fix controllers with no ctl port
From: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
commit 6d8ca28fa688a9354bc9fbc935bdaeb3651b6677 upstream.
Currently, ata_sff_softreset is skipped for controllers with no ctl port.
But that also skips ata_sff_dev_classify required for device detection.
This means that libata is currently broken on controllers with no ctl port.
No device connected:
[ 1.872480] pata_isapnp 01:01.02: activated
[ 1.889823] scsi2 : pata_isapnp
[ 1.890109] ata3: PATA max PIO0 cmd 0x1e8 ctl 0x0 irq 11
[ 6.888110] ata3.01: qc timeout (cmd 0xec)
[ 6.888179] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 16.888085] ata3.01: qc timeout (cmd 0xec)
[ 16.888147] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 46.888086] ata3.01: qc timeout (cmd 0xec)
[ 46.888148] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 51.888100] ata3.00: qc timeout (cmd 0xec)
[ 51.888160] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 61.888079] ata3.00: qc timeout (cmd 0xec)
[ 61.888141] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 91.888089] ata3.00: qc timeout (cmd 0xec)
[ 91.888152] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x5)
ATAPI device connected:
[ 1.882061] pata_isapnp 01:01.02: activated
[ 1.893430] scsi2 : pata_isapnp
[ 1.893719] ata3: PATA max PIO0 cmd 0x1e8 ctl 0x0 irq 11
[ 6.892107] ata3.01: qc timeout (cmd 0xec)
[ 6.892171] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 16.892079] ata3.01: qc timeout (cmd 0xec)
[ 16.892138] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 46.892079] ata3.01: qc timeout (cmd 0xec)
[ 46.892138] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 46.908586] ata3.00: ATAPI: ACER CD-767E/O, V1.5X, max PIO2, CDB intr
[ 46.924570] ata3.00: configured for PIO0 (device error ignored)
[ 46.926295] scsi 2:0:0:0: CD-ROM ACER CD-767E/O 1.5X PQ: 0 ANSI: 5
[ 46.984519] sr0: scsi3-mmc drive: 6x/6x xa/form2 tray
[ 46.984592] cdrom: Uniform CD-ROM driver Revision: 3.20
So don't skip ata_sff_softreset, just skip the reset part of ata_bus_softreset
if the ctl port is not available.
This makes IDE port on ES968 behave correctly:
No device connected:
[ 4.670888] pata_isapnp 01:01.02: activated
[ 4.673207] scsi host2: pata_isapnp
[ 4.673675] ata3: PATA max PIO0 cmd 0x1e8 ctl 0x0 irq 11
[ 7.081840] Adding 2541652k swap on /dev/sda2. Priority:-1 extents:1 across:2541652k
ATAPI device connected:
[ 4.704362] pata_isapnp 01:01.02: activated
[ 4.706620] scsi host2: pata_isapnp
[ 4.706877] ata3: PATA max PIO0 cmd 0x1e8 ctl 0x0 irq 11
[ 4.872782] ata3.00: ATAPI: ACER CD-767E/O, V1.5X, max PIO2, CDB intr
[ 4.888673] ata3.00: configured for PIO0 (device error ignored)
[ 4.893984] scsi 2:0:0:0: CD-ROM ACER CD-767E/O 1.5X PQ: 0 ANSI: 5
[ 7.015578] Adding 2541652k swap on /dev/sda2. Priority:-1 extents:1 across:2541652k
Signed-off-by: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Tejun Heo <tj@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/ata/libata-sff.c | 20 +++++++++-----------
1 file changed, 9 insertions(+), 11 deletions(-)
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -2008,13 +2008,15 @@ static int ata_bus_softreset(struct ata_
DPRINTK("ata%u: bus reset via SRST\n", ap->print_id);
- /* software reset. causes dev0 to be selected */
- iowrite8(ap->ctl, ioaddr->ctl_addr);
- udelay(20); /* FIXME: flush */
- iowrite8(ap->ctl | ATA_SRST, ioaddr->ctl_addr);
- udelay(20); /* FIXME: flush */
- iowrite8(ap->ctl, ioaddr->ctl_addr);
- ap->last_ctl = ap->ctl;
+ if (ap->ioaddr.ctl_addr) {
+ /* software reset. causes dev0 to be selected */
+ iowrite8(ap->ctl, ioaddr->ctl_addr);
+ udelay(20); /* FIXME: flush */
+ iowrite8(ap->ctl | ATA_SRST, ioaddr->ctl_addr);
+ udelay(20); /* FIXME: flush */
+ iowrite8(ap->ctl, ioaddr->ctl_addr);
+ ap->last_ctl = ap->ctl;
+ }
/* wait the port to become ready */
return ata_sff_wait_after_reset(&ap->link, devmask, deadline);
@@ -2215,10 +2217,6 @@ void ata_sff_error_handler(struct ata_po
spin_unlock_irqrestore(ap->lock, flags);
- /* ignore ata_sff_softreset if ctl isn't accessible */
- if (softreset == ata_sff_softreset && !ap->ioaddr.ctl_addr)
- softreset = NULL;
-
/* ignore built-in hardresets if SCR access is not available */
if ((hardreset == sata_std_hardreset ||
hardreset == sata_sff_hardreset) && !sata_scr_valid(&ap->link))
Patches currently in stable-queue which might be from linux@xxxxxxxxxxxxxxxxxxxx are
queue-3.10/libata-sff-fix-controllers-with-no-ctl-port.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html