From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
[ Upstream commit 23e60c8daf5ec2ab1b731310761b668745fcf6ed ]
According the "USB Type-C Port Controller Interface Specification v2.0"
the TCPC sets the fault status register bit-7
(AllRegistersResetToDefault) once the registers have been reset to
their default values.
This triggers an alert(-irq) on PTN5110 devices albeit we do mask the
fault-irq, which may cause a kernel hang. Fix this generically by writing
a one to the corresponding bit-7.
Cc: stable@xxxxxxxxxxxxxxx
Fixes: 74e656d6b055 ("staging: typec: Type-C Port Controller Interface driver (tcpci)")
Reported-by: "Angus Ainslie (Purism)" <angus@xxxxxxxx>
Closes: https://lore.kernel.org/all/20190508002749.14816-2-angus@xxxxxxxx/
Reported-by: Christian Bach <christian.bach@xxxxxx>
Closes: https://lore.kernel.org/regressions/ZR0P278MB07737E5F1D48632897D51AC3EB329@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/t/
Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
Signed-off-by: Fabio Estevam <festevam@xxxxxxx>
Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20230816172502.1155079-1-festevam@xxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/typec/tcpm/tcpci.c | 4 ++++
include/linux/usb/tcpci.h | 1 +
2 files changed, 5 insertions(+)
diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c
index 1a6aea9edc78..a7b0134d382b 100644
--- a/drivers/usb/typec/tcpm/tcpci.c
+++ b/drivers/usb/typec/tcpm/tcpci.c
@@ -615,6 +615,10 @@ static int tcpci_init(struct tcpc_dev *tcpc)
if (time_after(jiffies, timeout))
return -ETIMEDOUT;
+ ret = tcpci_write16(tcpci, TCPC_FAULT_STATUS, TCPC_FAULT_STATUS_ALL_REG_RST_TO_DEFAULT);
+ if (ret < 0)
+ return ret;
+
/* Handle vendor init */
if (tcpci->data->init) {
ret = tcpci->data->init(tcpci, tcpci->data);
diff --git a/include/linux/usb/tcpci.h b/include/linux/usb/tcpci.h
index 20c0bedb8ec8..f7c01ce879a2 100644
--- a/include/linux/usb/tcpci.h
+++ b/include/linux/usb/tcpci.h
@@ -103,6 +103,7 @@
#define TCPC_POWER_STATUS_SINKING_VBUS BIT(0)
#define TCPC_FAULT_STATUS 0x1f
+#define TCPC_FAULT_STATUS_ALL_REG_RST_TO_DEFAULT BIT(7)
#define TCPC_ALERT_EXTENDED 0x21
--
2.34.1
