FAILED: patch "[PATCH] usb: typec: tcpci: clear the fault status bit" failed to apply to 4.14-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch below does not apply to the 4.14-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@xxxxxxxxxxxxxxx>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.14.y
git checkout FETCH_HEAD
git cherry-pick -x 23e60c8daf5ec2ab1b731310761b668745fcf6ed
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@xxxxxxxxxxxxxxx>' --in-reply-to '2023090319-zone-occupier-984e@gregkh' --subject-prefix 'PATCH 4.14.y' HEAD^..

Possible dependencies:

23e60c8daf5e ("usb: typec: tcpci: clear the fault status bit")
ae8a2ca8a221 ("usb: typec: Group all TCPCI/TCPM code together")
0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode")
8a37d87d72f0 ("usb: typec: Bus type for alternate modes")
4ab8c18d4d67 ("usb: typec: Register a device for every mode")
0bc263149575 ("usb: update for tcpci drivers moving out of staging")
990da41530b3 ("staging: typec: tcpci: move tcpci drivers out of staging")
eafdca4d7010 ("Merge tag 'staging-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

>From 23e60c8daf5ec2ab1b731310761b668745fcf6ed Mon Sep 17 00:00:00 2001
From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
Date: Wed, 16 Aug 2023 14:25:02 -0300
Subject: [PATCH] usb: typec: tcpci: clear the fault status bit

According the "USB Type-C Port Controller Interface Specification v2.0"
the TCPC sets the fault status register bit-7
(AllRegistersResetToDefault) once the registers have been reset to
their default values.

This triggers an alert(-irq) on PTN5110 devices albeit we do mask the
fault-irq, which may cause a kernel hang. Fix this generically by writing
a one to the corresponding bit-7.

Cc: stable@xxxxxxxxxxxxxxx
Fixes: 74e656d6b055 ("staging: typec: Type-C Port Controller Interface driver (tcpci)")
Reported-by: "Angus Ainslie (Purism)" <angus@xxxxxxxx>
Closes: https://lore.kernel.org/all/20190508002749.14816-2-angus@xxxxxxxx/
Reported-by: Christian Bach <christian.bach@xxxxxx>
Closes: https://lore.kernel.org/regressions/ZR0P278MB07737E5F1D48632897D51AC3EB329@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/t/
Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
Signed-off-by: Fabio Estevam <festevam@xxxxxxx>
Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20230816172502.1155079-1-festevam@xxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c
index fc708c289a73..0ee3e6e29bb1 100644
--- a/drivers/usb/typec/tcpm/tcpci.c
+++ b/drivers/usb/typec/tcpm/tcpci.c
@@ -602,6 +602,10 @@ static int tcpci_init(struct tcpc_dev *tcpc)
 	if (time_after(jiffies, timeout))
 		return -ETIMEDOUT;
 
+	ret = tcpci_write16(tcpci, TCPC_FAULT_STATUS, TCPC_FAULT_STATUS_ALL_REG_RST_TO_DEFAULT);
+	if (ret < 0)
+		return ret;
+
 	/* Handle vendor init */
 	if (tcpci->data->init) {
 		ret = tcpci->data->init(tcpci, tcpci->data);
diff --git a/include/linux/usb/tcpci.h b/include/linux/usb/tcpci.h
index 85e95a3251d3..83376473ac76 100644
--- a/include/linux/usb/tcpci.h
+++ b/include/linux/usb/tcpci.h
@@ -103,6 +103,7 @@
 #define TCPC_POWER_STATUS_SINKING_VBUS	BIT(0)
 
 #define TCPC_FAULT_STATUS		0x1f
+#define TCPC_FAULT_STATUS_ALL_REG_RST_TO_DEFAULT BIT(7)
 
 #define TCPC_ALERT_EXTENDED		0x21
 




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux