5.10-stable review patch. If anyone has any objections, please let me know. ------------------ From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> This reverts commit 619672bf2d04cdc1bc3925defd0312c2ef11e5d0 which is commit 2d645604f69f3a772d58ead702f9a8e84ab2b342 upstream. It breaks the build, so should be dropped. Reported-by: Guenter Roeck <linux@xxxxxxxxxxxx> Link: https://lore.kernel.org/r/5b30ff73-46cb-1d1e-3823-f175dbfbd91b@xxxxxxxxxxxx Cc: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx> Cc: Sasha Levin <sashal@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- arch/mips/alchemy/common/dbdma.c | 27 ++++++++++++--------------- 1 file changed, 12 insertions(+), 15 deletions(-) --- a/arch/mips/alchemy/common/dbdma.c +++ b/arch/mips/alchemy/common/dbdma.c @@ -30,7 +30,6 @@ * */ -#include <linux/dma-map-ops.h> /* for dma_default_coherent */ #include <linux/init.h> #include <linux/kernel.h> #include <linux/slab.h> @@ -624,18 +623,17 @@ u32 au1xxx_dbdma_put_source(u32 chanid, dp->dscr_cmd0 &= ~DSCR_CMD0_IE; /* - * There is an erratum on certain Au1200/Au1550 revisions that could - * result in "stale" data being DMA'ed. It has to do with the snoop - * logic on the cache eviction buffer. dma_default_coherent is set - * to false on these parts. + * There is an errata on the Au1200/Au1550 parts that could result + * in "stale" data being DMA'ed. It has to do with the snoop logic on + * the cache eviction buffer. DMA_NONCOHERENT is on by default for + * these parts. If it is fixed in the future, these dma_cache_inv will + * just be nothing more than empty macros. See io.h. */ - if (!dma_default_coherent) - dma_cache_wback_inv(KSEG0ADDR(buf), nbytes); + dma_cache_wback_inv((unsigned long)buf, nbytes); dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */ wmb(); /* drain writebuffer */ dma_cache_wback_inv((unsigned long)dp, sizeof(*dp)); ctp->chan_ptr->ddma_dbell = 0; - wmb(); /* force doorbell write out to dma engine */ /* Get next descriptor pointer. */ ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); @@ -687,18 +685,17 @@ u32 au1xxx_dbdma_put_dest(u32 chanid, dm dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1); #endif /* - * There is an erratum on certain Au1200/Au1550 revisions that could - * result in "stale" data being DMA'ed. It has to do with the snoop - * logic on the cache eviction buffer. dma_default_coherent is set - * to false on these parts. + * There is an errata on the Au1200/Au1550 parts that could result in + * "stale" data being DMA'ed. It has to do with the snoop logic on the + * cache eviction buffer. DMA_NONCOHERENT is on by default for these + * parts. If it is fixed in the future, these dma_cache_inv will just + * be nothing more than empty macros. See io.h. */ - if (!dma_default_coherent) - dma_cache_inv(KSEG0ADDR(buf), nbytes); + dma_cache_inv((unsigned long)buf, nbytes); dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */ wmb(); /* drain writebuffer */ dma_cache_wback_inv((unsigned long)dp, sizeof(*dp)); ctp->chan_ptr->ddma_dbell = 0; - wmb(); /* force doorbell write out to dma engine */ /* Get next descriptor pointer. */ ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
