[PATCH AUTOSEL 6.1 11/15] scsi: storvsc: Always set no_report_opcodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Michael Kelley <mikelley@xxxxxxxxxxxxx>

[ Upstream commit 31d16e712bdcaee769de4780f72ff8d6cd3f0589 ]

Hyper-V synthetic SCSI devices do not support the MAINTENANCE_IN SCSI
command, so scsi_report_opcode() always fails, resulting in messages like
this:

hv_storvsc <guid>: tag#205 cmd 0xa3 status: scsi 0x2 srb 0x86 hv 0xc0000001

The recently added support for command duration limits calls
scsi_report_opcode() four times as each device comes online, which
significantly increases the number of messages logged in a system with many
disks.

Fix the problem by always marking Hyper-V synthetic SCSI devices as not
supporting scsi_report_opcode(). With this setting, the MAINTENANCE_IN SCSI
command is not issued and no messages are logged.

Signed-off-by: Michael Kelley <mikelley@xxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/1686343101-18930-1-git-send-email-mikelley@xxxxxxxxxxxxx
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/scsi/storvsc_drv.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 5284f9a0b826e..167f4d112a5f9 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -1567,6 +1567,8 @@ static int storvsc_device_configure(struct scsi_device *sdevice)
 {
 	blk_queue_rq_timeout(sdevice->request_queue, (storvsc_timeout * HZ));
 
+	/* storvsc devices don't support MAINTENANCE_IN SCSI cmd */
+	sdevice->no_report_opcodes = 1;
 	sdevice->no_write_same = 1;
 
 	/*
-- 
2.40.1




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux