From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> [ Upstream commit cfa12c32b96fd5b12f77d880d6a1ddd2a502756e ] GPIO_ACTIVE_x flags are not correct in the context of interrupt flags. These are simple defines so they could be used in DTS but they will not have the same meaning: GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE. Correct the interrupt flags, assuming the author of the code wanted same logical behavior behind the name "ACTIVE_xxx", this is: ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Tested-by: Christopher Obbard <chris.obbard@xxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20230707063335.13317-2-krzysztof.kozlowski@xxxxxxxxxx Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts index cec3b7b1b9474..8a17c1eaae15e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts @@ -31,7 +31,7 @@ brcmf: wifi@1 { compatible = "brcm,bcm4329-fmac"; reg = <1>; interrupt-parent = <&gpio0>; - interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "host-wake"; pinctrl-names = "default"; pinctrl-0 = <&wifi_host_wake_l>; -- 2.40.1
